Summary; Export Virtual Volumes; Welcome To The Export Virtual Volumes Wizard; Export - HP 3PAR StoreServ 7200 2-node Manual

1. In the Policies group box, enable any of the following, as needed:
Allow stale snapshots
Restrict export to one host
Enable zero detect (default)
Retention Time — If you enable this, enter a value in the corresponding field, and then
select either days or hours.
Expiration Time — If you enable this, enter a value in the corresponding field, and then
select either days or hours.
2. In the Geometry group box:
a. Enter the number of sectors per track or accept the default value.
b. Enter the number of heads per cylinder or accept the default value.
3. Click Next to view summary information, or click Finish.

Summary

Review the summary information, and then click Finish.

Export Virtual Volumes

Welcome to the Export Virtual Volumes Wizard

The Welcome screen describes the virtual volume export possibilities.
NOTE: If you click to select the Click here to skip this step in the future check box and later want
to reinstate the Welcome screen, delete this file:
C:\Users\<username>\SmartStart\preferences\preferences.xml

Export

1. In the General group box:
a. System - Select a system from the list.
b. Domain - Select a domain from the list. If not applicable, select <none>.
2. In the Virtual Volume group box:
a. Select either Virtual Volume or Virtual Volume Set.
b. From the virtual volume or virtual volume set list, select the volumes to export.
36 Configure Storage