Creating A Peer Motion Configuration; Select Systems - HP 3PAR StoreServ 7200 2-node Manual

Creating a Peer Motion Configuration

To use the Create PM Configuration wizard, the following conditions are required:
Storage systems must meet all the requirements in the HP 3PAR-to-3PAR Data Migration Guide
(http://www.hp.com).
Super user role.
At least one available source system and destination system that are not in a Peer Motion
configuration.
Perform the following tasks before using the wizard:
Choose two host ports on the source system. (You will need this information to zone the source
and destination systems.)
Configure the two host ports if not already configured.
The Create PM Configuration wizard guides you in configuring two peer ports on the destination
system and in zoning two systems into a Peer Motion configuration.
To create a Peer Motion Configuration:
1. Select Peer Motion in the Manager Pane.
2. Select Available Storage Systems in the Management Tree.
3. In the Common Actions panel, click Create PM Configuration.
The Create PM Configuration wizard appears.

Select Systems

1. Click the <Source> icon and select a source system.
12 Using the Peer Motion Manager