Mounting Kit - HP Integrity cx2600 Installation Instructions Manual

Mounting the Server with Chassis Front Aligned with Rack Posts
Figure 1-2 Front Mounting in a 2-Column Rack

Mounting Kit

Before mounting your server in a 2-column rack, inspect the mounting kit hardware. Review the installation
procedure and determine which screws will be required. (Alternate screws are provided due to the variations
in rack column mounting threads.) Verify that all needed parts are available. (A mounting kit parts list is
provided at the rear of this manual.)
Installation Procedure – Front Mount
Front-mount a server in a 2-column rack as follows:
Step 1. Install the tray (base) to the back of the rack columns, at the desired mounting position. Attach the
tray to the rack columns with T25 10-32 or 12-24 panhead screws, lockwashers, and #12
flatwashers.
Chapter 1
Mounting the Server with Chassis Front Aligned with Rack Posts
2pfrtmnt1
HP Server Mount Kit for 19 in. 2-Post Rack Installation Instructions
5