Overview
Front View
1
2-Port
VGA
KVM Switch
GCS1722
2
1. Port Selection Buttons
Press and release a switch to bring the KVM focus to
•
the computer attached to its corresponding port. The
Port LED lights bright orange.
Press and hold switches 1 & 2 for more than 2
•
seconds to start Auto Scan Mode, see page 14 for
details.
Press and release either switch (1 or 2) to stop Auto
•
Scan Mode. The KVM focus will go to the computer
attached to the corresponding port.
Press switches 3 and 4 simultaneously for 2 seconds
•
to perform a keyboard and mouse reset (GCS1724
only).
4-Port
VGA
KVM Switch
AUTO SCAN
GCS1724
2. Port LEDs
The Port LEDs are built into the Port Selection Switches.
KVM Status LEDs:
Lights DIM ORANGE indicates the computer attached
•
to the corresponding port is up and running (On Line).
Flashes indicates Firmware Upgrade mode is in effect.
•
Changes to BRIGHT ORANGE to indicate that the
•
computer attached to its corresponding port is the one
that has the KVM focus (Selected).
Flashes indicates that the computer attached to its
•
corresponding port is being accessed under Auto Scan
Mode.
- 7 -
1
K/M RESET
2