Using Your Cleaner; Cleaner Maintenance - Hoover SA 1110 Instruction Manual

PRePARING yOuR cleANeR
1.
Remove the accessories from the main packaging. you should find the following:
• cleaner body
• cleaner handle
• 3in1 tool
• extension tube
• carpet and floor nozzle
• floor polisher*
• Parquet caresse nozzle*
• electric power nozzle*
• Mini-turbo nozzle*
2.
Assemble the cleaner handle (fig. 2a) and fix in position with the supplied screw. (fig. 2b)
3.
Secure the 3in1 tool to the rear of the cleaner handle. (fig. 2c)
4.
Secure the nozzle to the product. (fig. 2d)
For models equipped with floor polisher* (fig. 3):
1.
If needed, the floor Polisher has to be attached underneath the carpet and floor nozzle.
2.
The floor polisher is ideal to polish hard floor, marble and wooden floor.
For models equipped with electric power nozzle*:
The electric power nozzle has to be secured to the product neck as per the carpet and floor
nozzle, but the electrical connection must be inserted to electric power nozzle socket. (fig. 4)
For models equipped with mini-turbo nozzle*:
1.
The mini-turbo nozzle can be connected directly to the flexi tube handle. (fig. 5a)
2.
If any blockages are encountered, please open the inspection cover. (fig. 5b)
3.
Ideal to clean soft furnishings and for the pet hairs removal.
Cord storage:
To store the cord after cleaning:
1.
Push the two panels on the rear of the product to allow the access to the cord hooks. (fig.
6a)
2.
wrap the cord around the two cord hooks. (fig. 6b)
3.
when the cord is removed, push the cord hook panels again to hide the hooks in the
body. (fig. 6c)
Note: during cleaning, the cord can be clipped in the cord grip on the rear of the handle to
avoid any interference while cleaning.
Synua__1-4_GB.indd 2

uSING yOuR cleANeR

power switch:
1.
To switch the cleaner on, press the power button in the centre of the cleaner.
2.
To switch off the product, repress the same button.
Cleaner lock release:
To start cleaning, unlock the cleaner by pressing with your foot the locking pedal on the nozzle.
(fig. 8)
Using the flexi tube
:
Remove the flexi tube from the handle location in the cleaner. (fig. 9)
you are immediately ready to use it alone or combined with the accessories, as desired:
• 3in1 tool (stored on board)
• extension tube*
• Mini-turbo nozzle*
• long crevice tool
The flexi tube gives you the maximum flexibility of usage. (fig. 10)
important - when using cleaning tools, the cleaner must be kept in the upright position,
and held.
Using your 3in1 tool:
The 3in1 tool (fig. 11) is composed of:
• crevice tool to clean corners and hard to reach areas
• furniture nozzle to clean curtains and soft furnishings
• dusting brush attachment (with bristles) to clean delicate surfaces
The 3in1 tool can be used directly on the flexi tube or combined with the additional extension
tube.

cleANeR MAINTeNANce

Emptying the dust Container
(fig. 12)
1.
Slide the bin release button downward and remove the dust bin from the cleaner.
2.
hold the container using the bin handle and pull the bin emptying latch. The dust
container door will automatically open.
3.
Once empty, gently tap or shake the container to release any excess dust.
important - do not fill above the max level mark shown on the bin.
2
GB
(fig. 7)
16-07-2009 16:34:31