Seat; Adjusting The Front Fork - Yamaha YZ85(B) Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seat

To remove the seat
Remove the bolts, and then slide the
seat to the rear and pull upward.
4
1. Bolt
To install the seat
1. Fit the slot in the seat onto the pro-
jection on the fuel tank, and insert
the projection on the seat into the
seat holder as shown.
EAU46281
1
2
3
1. Slot
2. Projection
3. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
TIP
Make sure that the seat is properly se-
cured before riding.
2

Adjusting the front fork

Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
This front fork is equipped with rebound
damping force adjusting screws and
compression damping force adjusting
screws.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Rebound damping force
To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting screw on each
fork leg in direction (a). To decrease the
rebound damping force and thereby
soften the rebound damping, turn the
adjusting screw on each fork leg in di-
rection (b).
4-7
WARNING
EAU41472
EWA10180
ECA10101