Table of Contents
Advertisement
DW-6510(¿ )-Dema 01.3.26 9:21 PM ˘ ` 4
HOW TO RINSE
Overflow Rinse
1 Set the Valve selector to the "WASH · RINSE" ("STRONG" or "NORMAL") position.
2 Turn the water tap on.
3 When the rinsing water becomes clear, turn off the water tap.
4 Set the Valve selector to the "DRAIN" position to discharge the water.
Water Saving Rinse
Note: Before rinsing, the wash load may be transferred to the spindryer drum for spinning for 2~3
minutes (approx.) to remove suds(See HOW TO SPIN DRYING).
On completion, transfer the wash load to the wash tub for rinsing.
1 Set the Valve selector to the "WASH • RINSE" or "OFF" position.
In case of non-pump model, set "STRONG" or "NORMAL" position.
2 Turn the water tap on and supply proper amount of water to the wash tub.
3 Adjust the wash timer in accordance with the clothes to be rinsed.
4 Set the Valve selector to the "DRAIN" position to discharge the water.
Spin Rinse
Before final rinsing you can select this course for more effective rinse.
1 Load the laundry evenly into the spindryer drum.
2 Cover the laundry with safety cover and close the inner lid.
3 Close the spindryer lid.
4 Set the water guide knob to "SPIN" and Valve selector to "DRAIN".
5 Supply water for about 1minute.
6 After water supply, set the spin timer 1~2minutes.
7 Repeat 5 ~ 6 , if you want.
Note: When you spin rinsing,
1. Do not supply water to spindryer drum while rotating with high speed, water may splash and rinsing
efficiency will be decreased.
2. For best efficiency load the laundry from 60% to 80% of the full capacity.
3. Do not drain the washing side simultaneously, the spindryer drum may be disturbed by remained
water in the spinning side.
4. If supplied water is too much, water would be wasted. Adjust water tap properly not to overflow to
the washing side.
4
Advertisement
Table of Contents
