HP Cisco MDS 8/12c Release Note page 28

Release notes hp c-series fabric switches for nx-os 5.2(2) (5697-1882, may 2012)

Hide thumbs Also See for Cisco MDS 8/12c:

Table of Contents

3. Remove fibre channel cables and remove the 2Gb module.

4. Insert the replacement 4Gb or 8Gb module.

5. Ensure that the module is properly recognized by the switch.

switch# show module <module number>

6. Configure appropriate VSANs on the new switch module.

7. Connect the fibre channel cables to the appropriate ports on the new module.

8. Ensure proper connectivity using Cisco management tools.

9. Configure the new module as you would when adding any new module to your switch.

Please refer to the Cisco MDS 9000 Family CLI Configuration Guide details on

configuring modules

MDS 9000 Series Multilayer Director & Multilayer Fabric Switches Release Notes

Table of Contents