HP Carrier-grade cc2300 Installation Instructions Manual page 6

7. Aligning the pins of the replacement processor with the socket, insert the replacement
processor into the socket (See Figure B).
8. Lower the locking bar completely (See Figure C).
9. Follow the instructions packaged with your boxed processor for preparing the heat sink
and processor for installation.
10. Position the heat sink above the processor while ensuring that the black THERMAL PAD
is positioned directly over the processor.
11. Aligning the raised metal surfaces, place the heat sink on top of the processor.
12. Place the heat sink clip so the tab on the clip engages the slot on the heat sink (See A in
Figure E). Position the clip so that the plastic tab on the retaining bracket in located in
the narrow portion of the heat sink clip opening.
13. Press one end of the clip down (See B in Figure E).
14. Press the other end of the clip down (See C in Figure E).
Figure F Disengaging the Retention Clips from the Processor
Socket