HP Carrier-grade cc2300 Installation Instructions Manual page 3

2. Aligning the pins of the processor with the socket, insert the processor into the socket.
Note the triangle locator on the socket and the processor chip for proper orientation.
Figure B Installing Processors
3. Lower the locking bar completely.
Figure C Lowering the Locking Bar
4. Position the heat sink above the processor ensuring that the black THERMAL PAD
(adhered to the bottom of the heat sink) is positioned directly over the processor.
NOTE: Handle the heat sink with extreme care to avoid damaging the cooling
fins and scratching the black THERMAL PAD on the bottom of the heat sink.