Important Notes - HP Brocade 8/12c Release Note

Important notes

Offline data migration notes
MPX200 Manager for Data Migration Services
Management for the MPX200 Data Migration Services uses the HP StorageWorks mpx Manager for
Data Migration Services GUI application. The HP StorageWorks mpx Manager for Data Migration
Services for Windows, Linux, and Apple OS X is available at:
http://hp.com/go/mpx200
See Table 1 for the mpx Manager for Data Migration Services hardware and software requirements.
Table 1 mpx Manager for Data Migration Services requirements
Heading
Operating system
Memory
Disk space
Processor
Hardware
Internet browser
User-defined bandwidth for a source array cannot be set greater than 400 MB/s with GUI
The source array bandwidth setting may be user-defined up to 1600 MB/s. However, the MPX200
manager for Data Migration Services GUI 3.0.1 does not allow a bandwidth greater than 400 MB/s.
This will be corrected in a later release. Use the MPX200 CLI migration command set array to set
the source array bandwidth greater than 400 MB/s.
6
Heading
Windows:
Windows 2003
Windows 2008
Windows XP
Windows Vista
Linux:
Red Hat v4.x and v5.2 Enterprise
SuSe v9.x and v10.x Enterprise
Apple:
Mac OS X v10.4
256 MB minimum
150 MB
500 mHz or faster
CD-ROM drive, RJ-45 Ethernet port, RS232 serial port (optional)
Microsoft Internet Explorer 5.0 and later
Netscape Navigator 4.72 and later
Mozilla 1.02 and later
Safari Java 2 Runtime Environment to support web applet