Product Support; Operating Systems; Installation Instructions - HP Brocade 8/12c Release Note

environments irrespective of data compressibility. For more information, see the MPX200 Multi-
function Router User Guide.
Added support for disabling ftp access. The default setting is enabled.
Resolution of a Microsoft Windows iSCSI Initiator connection problem. For more information, see
Fixes.

Product support

For the latest product support information, see the Single Point of Connectivity Knowledge (SPOCK)
on the HP website:
You must sign up for an HP Passport to access this website.

Operating systems

The MPX200 Multifunction Router supports the following operating systems:
Apple Mac OS X (Power PC and Intel Power Mac G5, Xserve, Mac Pro)
Linux–Red Hat, Linux–SUSE (x86, 32/64-bit, IA64)
Microsoft Windows, Hyper-V
Sun Solaris (SPARC and x86)
VMware ESX
For the latest product support information, see the Single Point of Connectivity Knowledge (SPOCK)
on the HP website:
You must sign up for an HP Passport to access this website.
Fixes
The following issue has been resolved in firmware version 3.2.0.1:
Upon an MPX200 blade reboot, the Microsoft iSCSI Initiator may show the target connection
status as Reconnecting.
Prerequisites
HP Command View EVA—The MPX200 requires HP Command View EVA version 9.2 or later.

Installation instructions

For information about installing the MPX200 Multifunction Router, see the HP StorageWorks MPX200
Multifunction Router EVA iSCSI Quick Start Instructions for Microsoft Windows, the HP StorageWorks
Multifunction Router FCIP Quick Start Instructions, and the HP StorageWorks MPX200 Multifunction
Router User Guide, available on the HP Manuals website:
http://www.hp.com/support/manuals
Under Storage, click Storage Networking, and then under Routers/Gateways/Multiplexers, select HP
StorageWorks MPX200 Multifunction Router.
http://www.hp.com/storage/spock
http://www.hp.com/storage/spock
MPX200 Multifunction Router Release Notes 5