Match the code numbers
The calibration code is stored in the meter memory
until it is changed by the user. The current code
number will appear on the display for 3 seconds.
• Compare the code number on the meter display
with the code number on the OneTouch
Test Strip vial.
• If the two code numbers match, you may begin
testing.
• If the code numbers do not match, follow the next
procedure to recode the InDuo™ meter.
Code the InDuo™ meter
• Press Ñ to select the correct code.
• Each time you press and release Ñ, the number
on the display will increase by one.
• To scroll faster, simply hold down Ñ.
• After you have selected the correct code number,
it will flash for 3 seconds and then appear solid for
3 seconds.
• The apply symbol R will appear with the unit of
measurement (fi or Á), indicating that
the InDuo™ meter is ready for testing.
GETTING YOUR InDuo™ SYSTEM READY FOR USE
®
Ultra
13
(Example)