HP 6125XLG Configuration Manual page 41

Blade switch irf configuration guide

Hide thumbs Also See for 6125XLG:

Layer 3 - ip routing configuration manual (492 pages)

Command reference manual (466 pages)

Configuration manual (414 pages)

Table Of Contents

Table of Contents

You need to assign a domain ID (range: 0-4294967295)

[Current domain is: 1]:

The assigned

Info: MAD LACP only enable on dynamic aggregation interface.

[Sysname-Bridge-Aggregation2] quit

# Assign Ten-GigabitEthernet 1/1/5, Ten-GigabitEthernet 2/1/5, Ten-GigabitEthernet 3/1/5,

and Ten-GigabitEthernet 4/1/5 to the aggregate interface.

[Sysname] interface ten-gigabitethernet 1/1/5

[Sysname-Ten-GigabitEthernet1/1/5] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet1/1/5] quit

[Sysname] interface ten-gigabitethernet 2/1/5

[Sysname-Ten-GigabitEthernet2/1/5] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet2/1/5] quit

[Sysname] interface ten-gigabitethernet 3/1/5

[Sysname-Ten-GigabitEthernet3/1/5] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet3/1/5] quit

[Sysname] interface ten-gigabitethernet 4/1/5

[Sysname-Ten-GigabitEthernet4/1/5] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet4/1/5] quit

Configure Device E as the intermediate device:

CAUTION:

If the intermediate device is also in an IRF fabric, assign the two IRF fabrics different domain IDs for

correct split detection. False detection causes IRF split.

# Create a dynamic aggregate interface.

<Sysname> system-view

[Sysname] interface bridge-aggregation 2

[Sysname-Bridge-Aggregation2] link-aggregation mode dynamic

[Sysname-Bridge-Aggregation2] quit

# Assign Ten-GigabitEthernet 1/0/1, Ten-GigabitEthernet 1/0/2, Ten-GigabitEthernet 1/0/3,

and Ten-GigabitEthernet 1/0/4 to the aggregate interface.

[Sysname] interface ten-gigabitethernet 1/0/1

[Sysname-Ten-GigabitEthernet1/0/1] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet1/0/1] quit

[Sysname] interface ten-gigabitethernet 1/0/2

[Sysname-Ten-GigabitEthernet1/0/2] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet1/0/2] quit

[Sysname] interface ten-gigabitethernet 1/0/3

[Sysname-Ten-GigabitEthernet1/0/3] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet1/0/3] quit

[Sysname] interface ten-gigabitethernet 1/0/4

[Sysname-Ten-GigabitEthernet1/0/4] port link-aggregation group 2

domain ID is: 1

Table of Contents

HP 6125XLG Configuration Manual page 41

Related Manuals for HP 6125XLG

Related Products for HP 6125XLG

Table of Contents