Web: Checking For Intrusions, Listing Intrusion Alerts, And Resetting Alert Flags - HP ProCurve Switch 6120G/XG Manual

Log Listing with
Security Violation
Detected
Log Listing with No
Security Violation
Detected
Figure 11-17.Example of Log Listing With and Without Detected Security Violations
From the Menu Interface: In the Main Menu, click on
Next page and Prev page to review the Event Log contents.
For More Event Log Information. See "Using the Event Log To Identify
Problem Sources" in the "Troubleshooting" chapter of the Management and
Configuration Guide for your switch.
Web: Checking for Intrusions, Listing Intrusion
Alerts, and Resetting Alert Flags
Check the Alert Log by clicking on the Status tab and the
1.
If there is a "Security Violation" entry, do the following:
Click on the Security tab.
a.
b. Click on
[Intrusion Log]
for which the alert flag has not been cleared.
c. To clear the current alert flags, click on
To access the web-based Help provided for the switch, click on
browser screen.
Configuring and Monitoring Port Security
Reading Intrusion Alerts and Resetting Alert Flags
. "Ports with Intrusion Flag" indicates any ports
[Reset Alert Flags]
Log Command
with
"security" for
Search
4. Event Log and use
[Overview] button.
.
in the web
[?]
11-37