HP ProCurve Switch 6120G/XG Manual page 385

ProCurve(config)# show port-access authenticator statistics
Port Access Authenticator Statistics
Port-access authenticator activated [No] : Yes
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Source
Port MAC address
---- -------------
001560-b3ea48
2
Figure 10-12.Example of show port-access authenticator statistics Command
Syntax: show port-access authenticator statistics [port-list]
Displays statistical information for all switch ports or spec-
ified ports that are enabled as 802.1X authenticators, includ-
ing:
• Whether port-access authentication is enabled
• Whether RADIUS-assigned dynamic VLANs are supported
• 802.1X supplicant's MAC address as determined by the
content of the last EAPOL frame received on the port
• 802.1X traffic statistics from received and transmitted
packets
802.1X configuration information for ports that are not
enabled as an 802.1X authenticators is not displayed.
TX TX
ReqId Req
------ ----- ------ ------- ------- ----- -------
1 0
Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
RX RX RX
Start Logoff RespId
0 0 0
RX RX
Resp Errors
0 0
10-55