HP ProCurve Switch 6120G/XG Manual page 132

ProCurve (config)# show port-access mac-based
Port Access MAC-Based Status
Auth
Port Clients Clients VLAN
---- ------- ------- -------- ------
1 1
2 2
3 4
ProCurve (config)# show port-access mac-based clients
Port Access MAC-Based Client Status
Port MAC Address IP Address
---- ----------- --------------------------------------- -------------
1 001321-eb8063 2001:fecd:ba23:cd1f:dcb1:1010:9234:4088 unauthenticated
1 000000-11111
2 00000-111111
Figure 4. Example of show port-access mac-based clients Command Output
Unauth Untagged Tagged
1 2003
0 MACbased No
0 1
Figure 3-22. Example of show port-access mac-based Command Output
Syntax: show port-access mac-based clients [port-list]
Displays the session status, name, and address for each
MAC-authenticated client on the switch. The IP address
displayed is taken from the DHCP binding table (learned
through the DHCP Snooping feature).
If DHCP snooping is not enabled on the switch, n/a (not
available) is displayed for a client's IP address.
If a MAC-authenticated client uses an IPv6 address, n/a - IPv6
is displayed.
If DHCP snooping is enabled but no MAC-to-IP address
binding for a client is found in the DHCP binding table, n/a
- no info is displayed.
192.192.192.192
n/a
Web and MAC Authentication
Configuring MAC Authentication on the Switch
Port
VLANs COS
--------
Yes 70000000
Yes
Yes No
Cntrl
Dir
------
Session Status
authenticated
authenticating
3-55