Configuration Commands For Mac Authentication - HP ProCurve Switch 6120G/XG Manual

Configuration Commands for MAC Authentication

Command
Configuration Level
aaa port-access mac-based addr-format
[no] aaa port-access mac-based [e] < port-list >
[addr-limit]
[addr-moves]
[auth-vid]
[logoff-period]
[max-requests]
[quiet-period]
[reauth-period]
[reauthenticate]
[server-timeout]
[unauth-vid]
Syntax: aaa port-access mac-based addr-format <no-delimiter | single-dash |
multi-dash | multi-colon | no-delimiter-uppercase | single-dash-
uppercase | multi-dash-uppercase | multi-colon-uppercase>
Specifies the MAC address format to be used in the RADIUS
request message. This format must match the format used
to store the MAC addresses in the RADIUS server. (Default:
no-delimiter)
no-delimiter — specifies an aabbccddeeff format.
single-dash — specifies an aabbcc-ddeeff format.
multi-dash — specifies an aa-bb-cc-dd-ee-ff format.
multi-colon — specifies an aa:bb:cc:dd:ee:ff format.
no-delimiter-uppercase — specifies an AABBCCDDEEFF
format.
single-dash-uppercase — specifies an AABBCC-DDEEFF
format
multi-dash-uppercase — specifies an AA-BB-CC-DD-EE-FF
format
multi-colon-uppercase — specifies an AA:BB:CC:DD:EE:FF
format.
Web and MAC Authentication
Configuring MAC Authentication on the Switch
Page
3-51
3-52
3-52
3-52
3-52
3-53
3-53
3-53
3-53
3-53
3-53
3-54
3-51