Lennox MPD-3530CNM-B Installation Instructions Manual page 37

LENNOX HEARTH PRODUCTS • MERIT
INSTALLATION ACCESSORIES CONTINUEd
Listed Secure Flex™ Components
Cat. #
These termination kits include firestop/spacer, gear clamps and flex adaptor.
60L10
98K03
H2248
H2249
56L74
56L75
91L66
91L67
H7748
PLUS DIRECT VENT GAS FIREPLACES (MPD33/35/40/45) • INSTALLATION INSTRUCTIONS
®
Model description
SF-18 18 feet (5.49 m) *
compressed flex
(Ref. Instr. #750053M)
SF-12 12 feet (3.66 m)*
compressed flex
(Ref. Instr. #750052M)
SF4.5HF-10 Firestop / Spacer -
Horizontal, flex (3-1-1
spacing), 10 Pack
SF4.5VF-10 Firestop/Spacer-Vertical,
flex (1-1-1 spacing), 10 Pk
SFVT30 Vertical Termination for flex
(flat to 6/12) with flex adaptor,
section of rigid vent, roof
support collar assembly, roof
flashing and storm collar.
(Ref. Instr. #750052M)
SFVT45 Vertical Termination for flex
(6/12 to 12/12) with flex
adaptor, section of rigid
vent, roof support collar
assembly, roof flashing,
and storm collar.
(Ref. Instr. #750052M)
SFGC4-6 Gear Clamp 4.5 in. (114 mm)
for flex (6 pack)
SFGC7-6 Gear Clamp 7.5 in. (190.5
mm) for flex (6 pack)
H7748 36" Flex Connector
Kit. 36" of flex with two
adapters for mating two
rigid sections of vent
together.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Listed Secure Flex™ Components
Cat. #
H1969
77L87
77L88
77L89
77L90
77L91
94L04*
94L05*
94L06*
94L07*
94L08*
94L09*
*
Only for use with MPdT/R-3328 and MPd-3530 models.
**
All compressed flex vents can be expanded up to two times.
Model description
SF4.5HT-2 Horizontal Square Termina-
tion for flex (without flex
vent)
SFKIT12S Square Term. for flex
(with 12 inch [305 mm]
compressed flex vent**)
SFKIT18S Square Term. for flex
(with 18 inch [457 mm]
compressed flex vent**)
SFKIT24S Square Term. for flex
(with 24 inch [610 mm]
compressed flex vent**)
SFKIT36S Square Term. for flex
(with 36 inch [914 mm]
compressed flex vent**)
SFKIT48S Square Term. for flex
(with 48 inch [1219 mm]
compressed flex vent**)
SFKIT12SS Small Square Termination for
flex, with 12 in. (305 mm) of
compressed flex vent**
(Ref. Instr. #750204M)
SFKIT18SS Small Square Termination for
flex, with 18 in. (457 mm) of
compressed flex vent**
(Ref. Instr. #750204M)
SFKIT24SS Small Square Termination for
flex, with 24 in. (610 mm) of
compressed flex vent**
(Ref. Instr. #750204M)
SFKIT36SS Small Square Termination for
flex, with 36 in. (914 mm) of
compressed flex vent**
(Ref. Instr. #750204M)
SFKIT48SS Small Square Termination for
flex, with 48 in. (1219 mm)
of compressed flex vent**
(Ref. Instr. #750204M)
SF-HTSS Horizontal Small Square
Termination for flex, without
flex vent
(Ref. Instr. #750204M)
37