Schedule - TP-Link TL-SC3430N User Manual

Parameter: the parameter of CGI (defined in Setting
→ URL) is from your target device. For example, move=down.
Message: message will show up in the form of Message = PTZ down. If your target device didn't
support the parameter of message, you can't see the message. So you can just take the
message as a note. For example: PTZ down.
Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the Schedule
setting in the other section.
Note:
You can set schedule function on Schedule page. (Please go to "Setting → Advanced → Schedule →
Setting")

7.6 Schedule

Click Schedule on the Advanced mode menu, the Schedule setting menu appears. This is the same
→ Advanced
74
→ HTTP event → General