Table of Contents
Advertisement
Viewer Authentication:
On: If the viewer authentication is On, the users will be requested to key-in username and
password when using QuickTime Player to have live viewing.
Off: If the viewer authentication is Off, you can have live viewing on computer by QuickTime
Player after entering "rtsp://ip:port/video.mp4" on the URL column directly.
Multicasting Streaming (if it's on):
Multicast Address: Specify the multicast server address.
Video / Audio Port: Specify the transmission port number of the video data, from 1124 to
65534.
Time-To-Live: Set the maximum TTL that multicast can pass through.
Note:
Time-To-Live option determines the maximum length of time (measure as the number of network
routers that can be passed before data arrives at its destination or is dropped) within which a
multicast packet must reach its destination.
Image Size: Specify the image size when the network camera transmits. Choose one among
1280 x 1024, 1280 x 720, 640 x 480, and 320 x 240.
Frame Rate: Set the frame rate of the MPEG-4 image. Choose one from 2, 3, 4, 5, 7, 10, and 15
fps. The unit "fps" stands for "frames per second."
Note:
The frame rate is up to 15 fps at 1280x1024.
Quality:
Auto: The quality and bitratee will be adjusted automatically according to the frame rate.
28
Advertisement
Table of Contents
