TP-Link TL-SC3430N User Manual page 67

Alarm Sending: Select On to set to send files with connection to the alarm detection to network
storage.
Image File Name: Type the file name you want to assign to the file to attach a mail. You can use
up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix: Select a suffix to add to the file name
Date & time: The date & time suffix is added to the Image file name. The date & time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits),
minute (2 digits) and second (2 digits), and consecutive number (2 digits), thus 14-digit
number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns to 1.
Alarm:
Motion Detection: Click it on for using Motion Detection function as a sensor. You can set
motion detection function at the motion detection function screen.
Note:
You can set motion detection at motion detection screen. (Please go "Setting → Advanced →
Motion Detection → Setting")
Audio Detection: Click it on for using Audio Detection function as a sensor. You can set
audio detection function at the audio detection function screen.
Note:
You can set audio detection at audio detection screen. (Please go "Setting → Advanced
→Audio Detection → Setting")
Network Link Down: Click it on to receive a video clip while network link down. It's for
recording video file in the IP CAM before and after disconnected network.
62