Main Menu - Canon LV-7292S User Manual

For detailed functions of each menu, see "Menu Tree" on pages 68-69.

Main Menu

①
②
③
④
⑤
⑥
⑦
⑧
① Input
Used to select an input source from COMPUTER or VIDEO. (pp.29, 38-39)
② PC adjust
Select Auto PC, Fine sync, Total dots, Horizontal position, Vertical position, Current mode,
Clamp, Display area H, Display area V, Reset, Mode free and Store to adjust the parameters
to match with the PC input signal format. (pp.31-32)
③ Image select
Used to select an image mode from among Presentation, Standard, High contrast, Cinema,
Blackboard(Green), Colorboard and User 1-4. (pp.34, 41)
④ Image adjust
For Computer source, used to adjust computer image [Contrast, Brightness, Color temp.,
White balance (R/G/B), Sharpness, Gamma, Reset and Store]. (p.35)
For VIDEO source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color
temp., White balance (R/G/B), Sharpness, Gamma, Noise reduction, Progressive, Reset
and Store]. (pp.42-43)
⑤ Aspect
For Computer source, used to adjust size of the image [ Normal, Full, 16:9, Zoom, True,
Custom, Custom adj., Digital zoom +/– , Keystone, Ceiling, Rear and Reset] . (pp.36-37)
For VIDEO source, used to set size of image [Normal, Full, 16:9, Zoom, Custom, Custom
adj., Keystone, Ceiling, Rear and Reset] . (pp.44-45)
⑥ Setting
Used to set the projector's operating configurations. (pp.46-58)
⑦ Information
Display the input source information. (p.59)
⑧ Guide
The key operation is displayed.
Main Menu
Sub-Menu
Basic Operation
25