Canon LV-7292S User Manual page 28

Basic Operation
BLANK button
Press the BLANK button on the remote
control unit to black out the image. To restore
to normal, press the BLANK button again or
press any button. When the projected image
is captured and is set as User in the Logo
selection (p. 48), the screen changes each time
you press the BLANK button as follows.
black out→ the captured image → normal
→ • • • • •
P-TIMER button
Press the P-TIMER button on the remote
control unit to operate the Count up/Count
down function. Refer to p.52 for detail of
Setting for the P-timer function.
To stop the count time, press the P-TIMER
button.
To restart the P-timer, press the P-TIMER
button again.
To cancel the P-timer function, press and hold
the P-TIMER button.
IMAGE button
Press the IMAGE button on the remote control
unit to select a desired image mode of the
screen. See pages 34, 41 for details.
ASPECT button
Select the screen size (See pages 36-37,
44-45 for details).
28
Remote control unit
LV-RC07
Note:
See the previous page for the description of other
buttons.
BLANK
Blank disappears after 4 seconds.
P-Timer
ASPECT button
P-TIMER button
BLANK button
IMAGE button