Canon LV-7292S User Manual page 56

Setting
Enter a PIN code
Use the Point ▲▼ buttons to enter a number.
Press the Point ◄ ► buttons to fix the number
and move the red frame pointer to the next
box. The number changes to . If you fixed an
incorrect number, use the Point ◄ ► buttons
to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a four-
digit number.
After entering the four-digit number, move the
pointer to Set. Press the OK button so that you
can change the following PIN code lock setting.
If you entered an incorrect PIN code, PIN code
and the number () will turn red for a
moment. Enter the correct PIN code all over
again.
Change the PIN code lock setting
Use the Point ▲▼ buttons to select Off, On
1 or On 2, and then press the OK button to
make a choice.
Change the PIN code
The PIN code can be changed to your desired
four-digit number. Press the OK button to
select PIN code change. Pin code dialog box
appears, use the Point ▲▼ buttons to enter
the correct code. The New PIN code input
dialog box appears. Set a new PIN code.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO
PIN CODE, WRITE DOWN THE NEW PIN
CODE AS A REMINDER. IF YOU FORGET
YOUR PIN CODE, THE PROjECTOR CAN
NO LONGER BE STARTED.
Note:
If you forget your PIN code and unable to change it,
the PIN code can be reset to the factory default setting
(1234) according to the following procedures.
When you reset the PIN code, the Logo PIN code and
Key lock will be reset, as well.
1. Unplug the AC Power Cord from the AC outlet.
2. Hold down the OK button on the projector and
connect the AC Power Cord into the outlet again.
Keep holding down the OK button until the POWER
indicator lights. The PIN code returns to the factory
default setting while the PIN code lock state will
remain the same as the previous set state.
56
Enter a PIN code
Change the PIN code
OK button
Enter current PIN code to
confirm
Enter new PIN code
Select Yes to finish the new
PIN code setting.