Panasonic KV-S1026C Operating Manual page 59

Symptom
Double feeding occurs
frequently or the unit stops
loading while scanning.
A double feed is detected
when scanning cards.
Paper jams occur frequently.
Scanned image is skewed.
The scanned document is
blank.
Possible Cause
The rollers are dirty.
The paper feed roller, or double feed
prevention roller have become worn
down.
Right and left sides of the document
to be scanned are not the same in
height, because of curling or folding.
The document is printed on an
unsupported type of paper or thick
paper.
The length of the paper is too short.
The document is not aligned
correctly.
The document set on the feed tray
has too many pages.
The cards are set in portrait
orientation.
The document is wrinkled.
The rollers are dirty.
The document is not aligned
correctly.
The document set on the feed tray
has too many pages.
The document guides are not
adjusted to the size of the document
to be scanned, or the document to be
scanned is set slanted on the feed
tray.
Right and left sides of the document
to be scanned are not the same in
height, because of curling or folding.
The document to be scanned was
loaded upside down.
Remedy
Clean the rollers. (page 46)
Replace the paper feed roller or
double feed prevention roller.
(page 53)
Flatten the document (page 31) and
load it again after reducing the pages.
Make a copy of the document on
paper of an acceptable type and
thickness (page 30), and scan the
copy.
Make a copy of the document on
paper of an acceptable size (page 30),
and scan the copy.
Realign the document. (page 33)
Remove pages from the document
until it is under the limit mark on the
document guides.
Either disable the double feed
detection function or set the cards in
landscape orientation.
Smooth out the document.
Clean the rollers. (page 46)
Realign the document. (page 33)
Remove pages from the document
until it is under the limit mark on the
document guides.
Adjust the document guides properly
to the size of the document to be
scanned. (page 33)
Flatten the document (page 31) and
load it again after reducing the pages.
Load the document correctly.
(page 35)
Operating Manual
Appendix
59