Using The On-Screen Display - Dell Mobile M900HD User Manual

Using the On-Screen Display

• The projector has a multi-language On-Screen Display (OSD) Menu that
can be displayed with or without an input source.
• Press the Menu button on the control panel or the remote control to enter
the Main Menu.
• To select an option, press the
panel or remote control.
• Use the
or buttons on the control panel or remote control to adjust
the settings.
• To exit the OSD, press the Menu button directly on the control panel or the
remote control.
INPUT SOURCE
The Input Source menu allows you to select your projector's input source.
NOTE:
If the DoUSB can not display, please see "Troubleshooting" on
page 71.
HDMI—
Press to detect a HDMI signal.
USB—
Allows you to playback the photo, music, or video files from your
USB flash disk. See "Multimedia Introduction" on page 35.
SD—
Allows you to playback the photo, music, or video files from your SD
card. See "Multimedia Introduction" on page 35.
I M —
NTERNAL EMORY
files from internal memory of the projector. See "Multimedia Introduction"
on page 35.
NOTE:
S M —
TORAGE ODE
source to execute copy, delete, move and more instructions from your
computer to projector internal memory and SD card.
or buttons on your projector's control
NTEL ®
I
the projector's Intel
screen (the default).
W -F
I
projector's Wireless Guide screen.
D USB—
O
computer/laptop screen to your
projector via the USB cable.
Allows you to playback the photo, music, or video
You may also connect USB cable in Internal Memory
W D —
Press to access
I I
®
WiDi Guide
—
Press to access the
I
Allows you to display the
Using Your Projector 25