Guiding Signals - Dell Mobile M115HD User Manual

Guiding Signals

Projector
Status
Standby Projector in Standby mode. Ready to
mode power on.
LED on Projector in Normal mode, ready to
display an image.
Cooling Projector is cooling to shutdown.
mode
Projector Air vents might be blocked or
overheated ambient temperature may be above
35 °C. The projector automatically
shuts down. Ensure that the air vents
are not blocked and that the ambient
temperature is within operational
range. If the problem persists,
contact Dell.
Fan One of the fans has failed. The
breakdown projector automatically shuts down.
If the problem persists, contact Dell.
LED failure LED defective.
R-LED driver Air vents might be blocked or the R­
over-heated LED driver has overheated. The
projector will automatically shut
down. Turn the display on again after
the projector cools down. If the
problem persists, contact Dell.
Control Buttons
Description
(White/Amber)
White Flashing
Troubleshooting Your Projector
Indicator
Power TEMP
(Amber)
OFF
White OFF
White OFF
OFF AMBER
AMBER
OFF
Flashing
OFF OFF
AMBER AMBER
(Amber)
OFF
OFF
OFF
OFF
OFF
AMBER
OFF
53