Guiding Signals - Dell M318WL User Manual

Guiding Signals

Projector
Status
Standby Projector in Standby
mode mode. Ready to power on.
LED on Projector in Normal mode,
ready to display an image.
Cooling Projector is cooling to
mode shutdown.
Projector Air vents might be blocked
over- or ambient temperature
heated may be above 35 °C. The
projector automatically
shuts down. Ensure that
the air vents are not
blocked and that the
ambient temperature is
within operational range. If
the problem persists,
contact Dell.
Fan One of the fans has failed.
breakdown The projector
automatically shuts down.
If the problem persists,
contact Dell.
LED LED defective.
failure
R-LED Air vents might be blocked
driver or the R-LED driver has
over- overheated. The projector
heated will automatically shut
down. Turn the display on
again after the projector
cools down. If the problem
persists, contact Dell.
Description
Control
Buttons
Power
TEMP
(White/
(Amber) (Amber)
Amber)
White
OFF
Flashing
White OFF
White OFF
OFF AMBER
AMBER
OFF
Flashing
OFF OFF
AMBER AMBER
Troubleshooting
Indicator
OFF
OFF
OFF
OFF
OFF
AMBER
OFF
45