Change Settings; Language Settings; Picture And Video Settings; Audio Settings - Philips home theater User Manual

6 Change settings

The home theater settings are already
configured for optimal performance. Unless
you have a reason to change a setting, we
recommend that you keep the default setting.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press BACK. To
exit the menu, press (Home).

Language settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Menu language]: Select a display
language for menu.
[Audio]: Select an audio language for
•
discs.
[Keyboard layout]: Select a keyboard
•
in your language.
• [Subtitle]: Select a subtitle language
for discs.
• [Disc menu]: Select a menu language
for discs.
Note
•
If your preferred disc language is not available, select
[Others] from the list, and enter the 4-digit language
code found at the end of this user manual (see
'Language code' on page 45).
•
If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
EN
30

Picture and video settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [TV display]: Select a picture format to
fit the TV screen.
[HDMI video]: Select the resolution of
•
video signal that is output from HDMI
OUT (ARC) on your home theater.
To enjoy the selected resolution,
make sure that your TV supports the
selected resolution.
• [HDMI Deep Color]: Recreate the
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
• [Picture settings]: Select pre defined
color settings for the video display.
Select [User] to create your own
setting.
[Watch 3D video]: Set HDMI video to
•
support 3D or 2D video.
Note
•
If you change a setting, make sure that the TV supports
the new setting.

Audio settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Night mode]: For quiet listening,
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
[HDMI Audio]: Set the HDMI audio
•
output from your TV, or disable HDMI
audio output from the TV.
• [Audio sync]: Set audio delay if audio
and video cannot be matched.

Parental control settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Change Password]: Set or change
•
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
• [Parental control]: Restrict access
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].

Display settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Auto subtitle shift]: Enable or disable
•
automatic repositioning of subtitles on
TVs that support this feature.
• [Display panel]: Set the brightness of
the home theater front panel display.
• [VCD PBC]: Enable or disable the
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.

Energy saving settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Screen saver]: Switch the home
theater to screen saver mode after 10
minutes of inactivity.
• [Auto standby]: Switch the home
theater to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
[Sleep timer]: Set the duration of the
•
sleep timer so that the home theater is
switched to standby after the specified
period.

Speaker settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Enhanced audio]: Select [On] to
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select [Off].
Tip
•
Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page
29).
EN
31