Mp3 Player; Ipod Or Iphone; Smartphone Control - Philips home theater User Manual

Button Action
SUBTITLE Toggle between the stereo
and mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. When you
switch the tuning grid, all preset radio stations
are erased.
1
Press (Home).
2
Select [FM Radio], and then press OK.
3
Press and hold (Play) to toggle between
50 kHz or 100 kHz.

MP3 player

Connect a MP3 player to play audio files.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your home theater.
• If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
2
Press SOURCE repeatedly until AUDIO
IN appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files.

iPod or iPhone

Through the home theater, you can play audio
files from your iPod or iPhone.
1
With an iPod/iPhone USB cable, connect
your iPod or iPhone to the iPod/iPhone
EN
22
(USB) connector at the side panel of your
home theater.
2
Press iPod/iPhone on the home theater
remote control.
• Charge your iPod/iPhone while the
home theater is in iPod/iPhone mode.
3
Browse your iPod or iPhone screen to
select the music.
4
Play the music on your iPod or iPhone.
» The music is heard on your home
theater.
Note
•
The USB connector at the back of the home theater is
500mA and not for Apple devices.
•
A device with more than 500mA cannot be charged via
the USB connector at the back of the home theater.

Smartphone control

Use your mobile device such as iPhone (iOS
3.1.3 and above), Android phone (2.1 and
above), iPad, or tablet to:
• Control your home theater
• Browse a data disc or USB storage device
• Switch to FM radio or Internet radio
• Browse Smart TV
• Personalize your sound settings
• Stream and share content from the devices
on your home network
Before you start
• Connect your home theater, mobile device,
and other DLNA-compatible devices to
the same home network.
• For better video quality, use wired
connection whenever possible.
• Personalize the network name for your
home theater (see 'Personalize the
network name' on page 15).
Download Philips MyRemote application
•
on your mobile device.
• For iPhone or iPad, search for the app
in App Store (App Store).
• For Android based phone or tablet,
search for the app in Market (Market).
Control your home theater
1
On the mobile device, access MyRemote
application.
2
Select your home theater (by its network
name) from the home screen.
» A browsing bar is displayed at the
bottom of the screen.
• If your home theater is not found,
check the network connection or tap
the Devices tab on your mobile device
to search again.
3
Select one of the following tabs to access
more options.
• To return to the previous screen, press
back button.
Option Action
App
Return to the home screen of your
Home
device.
Media DISC: Browse and play a file stored
on a data disc.
USB: Browse and play a file stored
on a USB storage device.
FM radio: Switch to FM radio.
Internet radio: Switch to Internet
radio. Make sure that your home
network has internet access.
Smart TV: Browse the Smart TV
portal.
Remote Access the remote control on your
mobile device. Swipe the screen
to the left or right to access more
buttons. Only the relevant buttons
are enabled on your mobile device.
Some functions such as standby
and long press, are not available on
the mobile device.
Sound MySound: Personalize the sound
setting to suit your preference.
Surround: Select a surround sound
setting.
4
Follow the onscreen instructions to select
an option or complete the set up.
Stream multimedia content
(SimplyShare)
Philips SimplyShare allows you to use your
smartphone to stream multimedia content
(such as pictures, audio and video files), and play
through your home theater or any DLNA-
compatible device in the same home network.
Before you start
• Install a DLNA-compliant media server
application on your mobile device, such as
Twonky Media Server.
• Enable media sharing of files. For details,
check the user manual of the media server
software software.
1
On the mobile device, launch the media
server application. For iPhone or Android
phone, access MyRemote application.
2
From the menu of your mobile device,
select SimplyShare.
» Your home theater and other
devices on the home network are
automatically detected and displayed
on the screen.
3
Select a device on the network.
» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
• If you cannot see the folders, make
sure that you enable media sharing on
the selected device so that the content
is available for sharing.
4
Select a media file to play.
5
From the menu on your mobile device,
select the home theater to stream the
media file to your home theater.
EN
23