Wireless Wan Device - Toshiba Portege Z10t-A Series User Manual

1. Turn off the computer's power.
2. Disconnect the AC adaptor and turn on the computer's power - if it
does not turn on then go to Step 4.
3. Operate the computer on battery power for five minutes. If you find
that the battery pack has at least five minutes of operating time,
continue operating until the battery pack is fully discharged, however, if
the Battery indicator flashes or there is some other warning to indicate
a low battery condition, go to Step 4.
4. Connect the AC adaptor to the DC IN 19V jack of the computer, and
to a wall outlet that is supplying power. The Battery indicator should
glow amber to indicate that the battery pack is being charged,
however, in the event that Battery indicator does not glow this
indicates that power is not being supplied - check the connections for
the AC adaptor and the power cord.
5. Charge the battery pack until the Battery indicator glows white.

Wireless WAN Device

Some computers are equipped with the Wireless WAN device. This device
gives you the ability for a high-speed connection to the Internet, corporate
intranet, and your email while you are away from the office.
Installing a SIM Card
To install a SIM card, follow the steps as detailed below:
1.
2.
3.
User's Manual
Turn off your computer.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
Locate the SIM card slot.
4-18