Toshiba Portege Z10t-A Series User Manual page 40

AccuPoint
Computer holder
Hooks
Docking connector
Eject button
DC IN 19V jack
LAN jack
External RGB monitor
port
User's Manual
Do not connect any cable other than a LAN cable to the LAN jack. It
could cause damage or malfunction.
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
A pointer control device located in the center of
the keyboard is used to control the on-screen
pointer.
Please refer to the
The holder provides firm support to the computer.
Hooks secure the physical connection between
the computer and the keyboard dock.
Connects to the computer.
Begins the computer's disconnect sequence.
Once the eject button is pressed and the
computer cannot communicate with external
devices connected to the keyboard dock. Undock
and re-dock the computer to re-establish
communication.
The AC adaptor connects to this jack in order to
power the computer and charge its internal
batteries. Please note that you should only use
the model of AC adaptor supplied with the
computer at the time of purchase - using the
wrong AC adaptor can cause damage to the
computer.
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). Refer to
Basics, for details.
This port provides 15-pin, analog RGB port.
Please refer to the
assignment section for information on external
RGB monitor port pin assignment. This port
allows you to connect an external RGB monitor
to the computer.
AccuPoint section for details
Operating
External RGB monitor port pin
3-9