Executing Sleep Mode - Toshiba Portege Z10t-A Series User Manual

When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always completely
shut down the computer. This includes turning off any wireless
communication functionalities, and cancelling settings that reactivate the
computer automatically, such as a timer recording function. Failure to
completely shut down the computer in this way could allow the operating
system to reactivate and run pre-programmed tasks or preserve unsaved
data, which could interfere with aviation or other systems, possibly causing
serious injury.
Benefits of Sleep Mode
The Sleep Mode feature provides the following benefits:

Executing Sleep Mode

You can enter Sleep Mode in one of three ways:
User's Manual
Before entering Sleep Mode, be sure to save your data.
Do not switch to Sleep Mode while transferring data to external media,
such as USB devices, memory media or other external memory
devices, as data will be lost.
The computer will automatically go into Sleep Mode according to the
settings in the Power Options (to access it, click Start -> Control
Panel -> System and Security -> Power Options). To prevent the
computer from automatically entering Sleep Mode, disable Sleep
Mode within the Power Options.
To restore the operation of the computer from Sleep Mode, press the
power button or any key on the keyboard dock for a short amount of
time. Please note that keyboard keys can only be used if the Wake-up
on Keyboard option is enabled within the TOSHIBA HWSetup utility.
If the computer enters Sleep Mode while a network application is
active, the application might not be restored when the computer is
next turned on and the system returns from Sleep Mode.
To use the Hybrid Sleep function, configure it in the Power Options.
Restores the previous working environment more rapidly than the
Hibernation Mode feature.
Saves power by shutting down the system when the computer
receives no input or hardware access for the time period set by the
System Sleep Mode feature.
Allows the use of the panel power off feature.
Click Start, point to the arrow ( ) beside the Shut down button and
then select Sleep from the menu.
2-10