Removing The Reserve Pen; Inserting The Reserve Pen - Toshiba Portege Z10t-A Series User Manual

Hide thumbs Also See for Portege Z10t-A Series:
Table of Contents

Advertisement

Removing the Reserve Pen

To remove the Reserve Pen, slowly pull the Reserve Pen to remove it from
the Reserve Pen slot.
1. Reserve Pen slot

Inserting the Reserve Pen

To insert the Reserve Pen, slowly push the Reserve Pen into the Reserve
Pen slot until it clicks into place.
User's Manual
The pen tip of the Reserve Pen cannot be replaced if it is worn. You
can purchase a new one from a TOSHIBA authorized dealer.
You can change the pen settings in Pen and Touch. To access it, click
Start -> Control Panel -> Hardware and Sound -> Pen and Touch
Please wipe the touch screen with the provided cloth before you use
the stylus pen.
Please clean the fingerprints or smudges with the provided cloth if the
sensitivity to pen writing decreases.
Do not use a protecting sheet for the touch screen as it may impact
the pen writing optimized for the touch screen.
It is recommended that you keep another pen set as a spare. You can
buy replacement pen sets from your TOSHIBA authorized dealer.
TOSHIBA is not liable for any problems arising on the products due to
the use of the pen in an environment where the above conditions are
not satisfied or because of its use by unspecified number of users.
Figure 4-9 Removing the Reserve Pen
1
2
2. Reserve Pen
4-8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wt310 series

Table of Contents