Toshiba TECRA A50-E User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. TECRA A50-E Series
  6. User manual
Toshiba TECRA A50-E User Manual

Toshiba TECRA A50-E User Manual

Hide thumbs Also See for TECRA A50-E:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Satellite Pro R50-E/A50-E
TECRA A50-E/Z50-E

Advertisement

Table of Contents
loading

Related Manuals for Toshiba TECRA A50-E

Summary of Contents for Toshiba TECRA A50-E

  • Page 1 User's Manual Satellite Pro R50-E/A50-E TECRA A50-E/Z50-E...

  • Page 2: Table Of Contents

    Operating Basics Using the Touch Pad ................4-1 The Keyboard ..................4-2 Optical disc drive .................. 4-5 CyberLink PowerDVD 14 DVD for TOSHIBA ........4-10 Using the AccuPoint ................4-12 Using the Fingerprint Sensor ............. 4-13 Battery ....................4-15 User's Manual...
  • Page 3 LAN ....................... 4-28 Memory media ..................4-30 Smart Card ................... 4-33 External Display .................. 4-34 TOSHIBA Hi-Speed Port Replicator III 180W/120W ......4-37 Security lock ..................4-39 Optional TOSHIBA Accessories ............4-39 Sound System and Video mode ............4-40 Chapter 5 Utilities and Advanced Usage Utilities and Applications ..............
  • Page 4 User's Manual...

  • Page 5: Chapter 1 Toshiba Legal, Regulatory, And Safety

    Copyright, Disclaimer and Trademarks Copyright © 2018 Toshiba Client Solutions Co., Ltd. All Rights Reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 6: Regulatory Information

    Consult the dealer or an experienced radio/TV technician for help. Only peripherals complying with the FCC class B limits can be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and User's Manual...
  • Page 7 RGB monitor port, Universal Serial Bus (USB 2.0 and 3.0) ports, HDMI™ out port and Headphone/Microphone jack. Changes or modifications made to this equipment, not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate the equipment. FCC conditions This device complies with part 15 of the FCC Rules.
  • Page 8 EMC (Electromagnetic Compatibility) standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 9 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 10 Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
  • Page 11 For more detailed information about the collection and recycling programmes available in your country, please visit our website ( www.toshiba.eu/recycling ) or contact your local council office or the retail outlet where you purchased the product. User's Manual...
  • Page 12 Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.
  • Page 13 Toshiba meets all requirements of Turkish regulation 28300 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”.

  • Page 14: Video Standard Notice

    Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH...
  • Page 15 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit"...

  • Page 16: Freetype License Issues

    This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
  • Page 17 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
  • Page 18 authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release. `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'.
  • Page 19 -------------- Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType Distribution'.

  • Page 20: Energy Star® Program

    If the model you purchased is compliant, it uses the ENERGY STAR logo and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer...

  • Page 21: Optical Disc Drive Safety Instructions

    Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. Optical disc drive safety instructions Be sure to check the precautions at the end of this section. The drive model employs a laser system.

  • Page 22: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
  • Page 23 Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they might overheat. To keep your computer in prime operating condition, protect your work area from: Dust, moisture, and direct sunlight. Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones.
  • Page 24 Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely. In these circumstances, you should get the computer inspected by an authorized service provider in order to assess the scope of any damage.

  • Page 25: Safety Icons

    Mobile phones Be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30 cm is maintained between the computer and a mobile phone that is in use.

  • Page 26: Chapter 2 Getting Started

    This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by TOSHIBA, some of the features described in this manual might not function properly. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.

  • Page 27: Using Your Computer For The First Time

    Double-click Tap the Touch Pad or click the left Touch Pad control button twice. Left click the mouse twice. Start The word "Start" refers to the " " button in the lower-left corner of the screen. Using your computer for the first time Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer.
  • Page 28 Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury.
  • Page 29 Figure 2-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord is included with the computer depending on the model. Connect the DC output plug of the AC adaptor to the DC IN 19V jack on your computer.
  • Page 30 Open and close the display panel with reasonable care. Opening it vigorously or slamming it shut might damage the computer. Do not put your fingers in the gap between the LCD panel and battery pack when closing your LCD, otherwise your fingers might get hurt. Be careful not to open the display panel too far as this might put stress on the display panel’s hinges and cause damage.

  • Page 31: Getting To Know Windows

    Figure 2-5 Turning on the power 1. Power button Product appearance depends on the model you purchased. Initial setup The Windows Startup Screen is the first screen displayed when you turn on the power. To install the operating system properly, follow the on-screen instructions on each screen.
  • Page 32 Task view Task view ( ) is launched from Windows taskbar at the bottom of the screen. Task view allows you to view the apps that are currently running. Also, you can create custom desktops so that running apps can be grouped for entertainment, productivity, or what you just want.

  • Page 33: Turning Off The Power

    Windows Hello Windows Hello is a more personal and secure way to sign in to your Windows system, apps, and services using fingerprint or face recognition. To set up Windows Hello, click Start -> (Settings) -> Accounts -> Sign- in options. Under Windows Hello, you will see options for Face Recognition and Fingerprint if your computer has fingerprint sensor and if your computer has face recognition sensor that supports it.
  • Page 34 Make sure all disk/disc activity has stopped before removing the disk/ disc. If you turn off the power while a disk (disc) is being accessed, you might lose data or damage the disk. Never turn off the power while an application is running. Failure to do so can cause data loss.
  • Page 35 Note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the TOSHIBA Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.
  • Page 36 When the computer is in Sleep Mode, the Power indicator blinks amber. If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode. Sleep Mode consumes more power while the computer is off. Sleep Mode limitations Sleep Mode will not function under the following conditions: Power is turned back on immediately after shutting down.

  • Page 37: System Recovery

    Restoring the pre-installed software from your created Recovery Media Restoring the pre-installed software from the Recovery Partition If you choose TOSHIBA Maintenance Utility to erase the internal storage drive, all data including the operating system and recovery partition will be User's Manual...
  • Page 38 In that case, you cannot create recovery media or restore the pre- installed software from the recovery partition. Make sure that you have already created recovery media before you start TOSHIBA Maintenance Utility. This recovery media can be used to restore your system after you have erased your internal storage drive.
  • Page 39 If your model has fingerprint function, before you reinstall the Windows operating system, delete the registered fingerprints. Otherwise, same fingerprints cannot be registered after the reinstallation. Make sure to use the default Boot Mode option in TOSHIBA Setup Utility before restoring. Launch the TOSHIBA Setup Utility.
  • Page 40 Recovery Media, the Recovery Media cannot be created. However, if you have already created a Recovery Media, you can use it to restore the recovery partition. If you have not created Recovery Media, contact TOSHIBA support for assistance. Restoring the pre-installed software from the...

  • Page 41: Chapter 3 The Grand Tour

    Chapter 3 The Grand Tour This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section.

  • Page 42: Left Side

    Power indicator The Power indicator normally glows white when the computer is turned on. However, if you turn off the computer into Sleep Mode, this indicator flashs amber. Wireless The Wireless communication indicator glows communication white when the wireless functions are turned on. indicator Some models are equipped with wireless functions.
  • Page 43 LAN jack This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). Refer to Operating Basics, for details.

  • Page 44: Right Side

    Smart Card slot This slot allows you to install a Smart Card device. Some models are equipped with a Smart Card slot. Optical disc drive The computer is configured with a DVD Super Multi drive. Some models are equipped with an optical disc drive.
  • Page 45 Memory media slot This slot lets you insert an SD™/SDHC™/ SDXC™ memory card, miniSD™/microSD™ Card and MultiMediaCard™. Refer to the Memory media section for more information. Keep foreign metal objects, such as screws, staples, and paper clips, out of the Memory media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

  • Page 46: Back

    Do not block the cooling vents. Keep foreign metal objects, such as screws, staples, and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Carefully clean the dust on the surface of the cooling vents using a soft cloth.
  • Page 47 Figure 3-5 The underside of the computer 1. Battery lock 4. Docking port* 2. Battery release latch 5. Memory module cover* 3. Cooling vents * Provided with some models. Product appearance depends on the model you purchased. Battery lock Slide the battery lock to release the battery pack ready for removal.

  • Page 48: Front With The Display Open

    180W/120W. Some models are equipped with the docking port. Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is compatible with the docking port. Do not attempt to use any other Port Replicator. Keep foreign objects out of the docking port. A pin or similar object can damage the circuitry of the computer.
  • Page 49 Figure 3-6 The front of the computer with the display panel open 1. Wireless communication antennas 8. Display hinges (not shown)* 2. Microphones* 9. Keyboard 3. Web Camera* 10. Touch Pad 4. Web Camera LED* 11. Touch Pad control buttons 5.
  • Page 50 Wireless Depending on the configuration of your communication computer, one or all of the following antennas are antennas built-in: Wireless LAN ® Wireless LAN/Bluetooth Some models are equipped with wireless communication antennas. Do not cover the wireless communication antennas area with any metal objects, otherwise the wireless function might not work.
  • Page 51 Display screen 39.6 cm (15.6") LCD screen, is configured with the following resolution: HD, 1366 horizontal x 768 vertical pixels FHD, 1920 horizontal x 1080 vertical pixels Be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen is somewhat brighter than when it operates on battery power.

  • Page 52: Internal Hardware Components

    AccuPoint A pointer control device located in the center of the keyboard is used to control the on-screen pointer. Some models are equipped with an AccuPoint. AccuPoint control Control buttons below the keyboard let you select buttons menu items or manipulate text and graphics designated by the on-screen pointer.

  • Page 53: Power Condition Descriptions

    RTC battery The internal RTC battery backs up the Real-Time Clock (RTC) and calendar. Power Condition Descriptions The computer operating capability and battery charge status are affected by different power conditions, including whether an AC adaptor is connected and what the battery charge level is. DC IN/Battery indicator Check the DC IN/Battery indicator to determine the status of the battery pack and the power status with the AC adaptor connected.
  • Page 54 No light Under any other conditions, the indicator does not light. User's Manual 3-14...

  • Page 55: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Using the Touch Pad The Touch Pad on the palm rest might support the following gestures: Tap once on the Touch Pad to activate an item, such as an app.

  • Page 56: The Keyboard

    Three-Finger Scroll Place three fingers down and slide them vertically or horizontally from anywhere on the Touch Pad. Slide towards left/right: switches between your open apps. Slide your fingers slowly across the Touch Pad to flip through them all.Slide up: views all your open apps in task view.Slide down: shows the desktop.
  • Page 57 Figure 4-1 Keypad indicator 1. CAPS LOCK indicator 2. NUM LOCK indicator CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format. NUM LOCK When the NUM LOCK indicator glows, you can use the number keys on the keyboard for number entry.
  • Page 58 Some functions show the toast notification at the edges of the screen. Those toast notifications are enabled by default. You can disable them in the TOSHIBA settings. To access it, click Start -> TOSHIBA Settings -> Keyboard. Windows special keys The keyboard provides two keys that have special functions in Windows, ®...

  • Page 59: Optical Disc Drive

    This key has the same function as the secondary (right) mouse button. Optical disc drive Some models will be installed with a DVD Super Multi drive. Formats The drive supports the following formats: CD-ROM, DVD-ROM, DVD- Video, CD-DA, CD-Text, Photo CD™ (single/multi-session), CD-ROM Mode 1/Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD- EXTRA), Addressing Method 2, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD-R DL (Format1), DVD+R DL.
  • Page 60 Lay the disc, label side up, in the disc tray. Figure 4-3 Inserting a disc 1. Laser lens When the disc tray is fully opened, the edge of the computer covers the disc tray slightly. Therefore, you must to turn the disc at an angle when you place it in the disc tray.
  • Page 61 When the disc tray pops open slightly, wait a moment to make sure the disc has stopped spinning before pulling the disc tray fully open. The disc extends slightly over the sides of the disc tray so you can grasp it. Gently lift out the disc. Push the center of the disc tray to close it.
  • Page 62 Also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. User's Manual...
  • Page 63 CD-R: MITSUBISHI KAGAKU MEDIA CO., LTD. CD-RW: (Multi-Speed, High-Speed and Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media) DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media) DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD.

  • Page 64: Cyberlink Powerdvd 14 Dvd For Toshiba

    Close all other applications when using the CyberLink PowerDVD 14 DVD for TOSHIBA. Do not open any other applications or carry out any other operations during video playback. Playback may stop or not function properly in some situations.
  • Page 65 Do not lock the computer using the Windows logo ( ) + L keys when running the CyberLink PowerDVD 14 DVD for TOSHIBA. The CyberLink PowerDVD 14 DVD for TOSHIBA does not have a parental control function. Carry out the installation/uninstallation of the CyberLink PowerDVD 14 DVD for TOSHIBA under a user account with administrator rights.

  • Page 66: Using The Accupoint

    CyberLink PowerDVD 14 DVD for TOSHIBA Help. Use the following procedure to open CyberLink PowerDVD 14 DVD for TOSHIBA Help. Press the F1 key when CyberLink PowerDVD 14 DVD for TOSHIBA is launched. Using the AccuPoint To use the AccuPoint, simply push it with your finger tip in the direction you want to move the on-screen pointer.

  • Page 67: Using The Fingerprint Sensor

    Position a new cap on the peg. Be careful to let the peg inserted into the round groove inside the new cap and then press it into place. You can buy replacement AccuPoint caps from your TOSHIBA authorized dealer. AccuPoint cap is a removable part. Always use the AccuPoint with reasonable care.
  • Page 68 Figure 4-6 Using the Fingerprint Sensor 1. Fingerprint sensor Fingerprint cannot be used in models that do not have a fingerprint function. Total fingerprints which can be registered are 20 pcs. Points to note about the Fingerprint Sensor Be aware of the following considerations when using the fingerprint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, fingerprint recognition problems or a lower fingerprint recognition success rate.

  • Page 69: Battery

    Avoid the following finger conditions for enrollment or recognition as they might result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate Soaked or swollen finger, for example as might occur after taking a bath. Injured finger Wet finger Soiled or oily finger Extremely dry skin condition on finger...
  • Page 70 If the RTC battery becomes completely discharged, the system will lose this information and the real- time clock and calendar will stop working. You can change the Real-Time Clock settings in the TOSHIBA Setup Utility. Refer to Real Time Clock for further information.
  • Page 71 Charging the batteries When the power in the battery pack becomes low, the DC IN/Battery indicator flashes amber to indicate that only a few minutes of battery power remain. If you continue to use the computer while the DC IN/Battery indicator flashes, the computer enters Hibernation Mode so that you do not lose any data, and automatically turn itself off.
  • Page 72 The battery has completely discharged and been left in the computer for a long time. In such cases, do the following: Fully discharge the battery by leaving it in the computer with the power on until the system automatically turns itself off. Connect the AC adaptor to the DC IN 19V jack of the computer, and to a wall outlet that is supplying power.
  • Page 73 System Sleep Mode System Hibernation Mode Display power off period Whether you enable Sleep Mode, which can conserve battery power if you are frequently turning the computer off and on The condition of the battery terminals. Always ensure the terminals stay clean by wiping them with a clean dry cloth before installing the battery pack Batteries exhausted time...
  • Page 74 operating your computer away from an AC power source for an extended period of time. This section explains how to remove and install the battery pack, and begins with the removal process which is detailed through the following steps. Do not remove the battery pack while the computer is in Sleep Mode, as data is stored in RAM, so if the computer loses power it might be lost.

  • Page 75: Wireless Wan Device

    Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries. Insert the battery pack as far as it will go into the computer. Ensure that the battery pack is securely in place and the battery lock is in its locked ( ) position.
  • Page 76 To pop the SIM card tray partially open, insert a slender object (about 10mm, diameter 0.8mm), such as a straightened paper clip, into the eject hole. Gently pull to open the SIM card tray. Never pull the SIM card tray completely out of the slot. Figure 4-8 Open the SIM card tray with the eject hole 1.

  • Page 77: Gps Function

    Never allow metal objects, such as screws, staples and paper clips, to enter the computer. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury. Do not touch the connectors on the SIM card or on the computer. Debris on the connectors might cause access problems.
  • Page 78 When installing or removing a memory module, you must ensure that you do not touch any other internal areas of the computer. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions.
  • Page 79 Slide your fingernail or a thin object under the cover and lift it off. Figure 4-10 Removing the memory module cover 1. Screw 2. Memory module cover User's Manual 4-25...
  • Page 80 Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 30 degree angle before holding it down until the latches on either side snap into place. Figure 4-11 Seating the memory module 1.
  • Page 81 Seat the memory module cover in place and secure it with the screw. Ensure that the memory module cover is firmly closed. Figure 4-12 Seating the memory module cover 1. Memory module cover 2. Screw Install the battery pack. 10. Turn your computer over. 11.

  • Page 82: Lan

    Grasp the module by its edges and remove it from the computer. If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them.
  • Page 83 LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings might cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T), be sure to connect with a CAT5e cable or higher.

  • Page 84: Memory Media

    Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection. Memory media The computer is equipped with a memory media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.
  • Page 85 The SD memory card logo is ( The SDHC memory card logo is ( The SDXC memory card logo is ( The maximum capacity of SD memory cards is 2 GB. The maximum capacity of SDHC memory cards is 32 GB. The maximum capacity of SDXC memory cards is 256 GB.
  • Page 86 For more details on using memory cards, see manuals accompanying the cards. About the write-protect feature Memory media cards have a write-protect function. SD Card (SD memory card, SDHC memory card and SDXC memory card) Set the write-protect switch to the lock position, if you do not want to record data.

  • Page 87: Smart Card

    Removing memory media The following instructions apply to all types of supported media devices. To remove memory media, do the following: Click the Safely Remove Hardware and Eject Media icon on the Windows Taskbar. Select the memory media that you want to remove. Push the memory media until you hear a click to partially release it.

  • Page 88: External Display

    Press the Smart Card gently to ensure a firm connection is made. The computer will identify the Smart Card and display an icon in the Windows Taskbar. When inserting a Smart Card into the Smart Card slot, make sure to confirm that the card is oriented correctly before inserting.
  • Page 89 External RGB monitor port An external analog monitor can be connected to the External RGB monitor port on the computer. To connect an external analog monitor, do the following: Connect one end of the RGB cable to the External RGB monitor port. Connect the other end of the RGB cable to the RGB port of the computer.
  • Page 90 Turn the HDMI™ display device's power on. Figure 4-18 Connecting the HDMI™ out port 1. HDMI™ out port 2. HDMI™ cable Do not plug/unplug an HDMI™ device under the following conditions: The system is starting up. The system is shutting down. When you connect a television or external monitor to the HDMI™...

  • Page 91: Toshiba Hi-Speed Port Replicator Iii 180W/120W

    Click the Set Default button. Click OK to close the Sound dialog. TOSHIBA Hi-Speed Port Replicator III 180W/ 120W In addition to the ports available on the computer, the TOSHIBA Hi-Speed Port Replicator III 180W/120W also provides several kinds of ports. User's Manual 4-37...
  • Page 92 The Port Replicator connects directly to the docking interface on the underside of the computer. The AC adaptor connects the Port Replicator to a power source. You must connect the AC adaptor before you connect to a Port Replicator. The ports on the Port Replicator might have higher priority than the ports on the docked computer.

  • Page 93: Security Lock

    Make sure the AC adaptor is always connected to the TOSHIBA Hi-Speed Port Replicator III 180W/120W while in use. Otherwise the Port Replicator will stop working, possibly resulting in data loss. Some models support multiple display function if equipped with a TOSHIBA Hi-Speed Port Replicator III 180W/120W.

  • Page 94: Sound System And Video Mode

    Battery section for further information. TOSHIBA Hi-Speed TOSHIBA Hi-Speed Port Replicator III 180W/ Port Replicator III 120W provides several kinds of ports. Refer to 180W/120W the Port Replicator’s User's Manual for more details.
  • Page 95 On the Enhancements tab, select the sound effects you would like, and click Apply. DTS Studio Sound™ DTS Studio Sound™ is a premium audio enhancement suite that utilizes revolutionary audio technology to provide the most immersive and realistic listening experience ever offered for a two speaker playback environment. DTS Studio Sound™...
  • Page 96 When audio power management is enabled, the circle button at the upper left of the Power Management is blue and convex. When audio power management is disabled, the button is black and concave. Speaker Configuration Click the Auto Test button to confirm the internal speakers or the headphone sound is coming from the right direction.

  • Page 97: Chapter 5 Utilities And Advanced Usage

    TOSHIBA Settings TOSHIBA Settings is the TOSHIBA configuration management tool available through the Windows operating system. To run TOSHIBA Settings, click Start -> TOSHIBA Settings. This utility allows you to configure your computer settings by the following tabs: Home—Allows you to view the current BIOS/EC version or change certain settings back to their default values eco Utility—Allows you to manage the power consumption of your...
  • Page 98 OFF. "Power OFF" includes Sleep Mode, Hibernation Mode, or shutdown state. To set USB Sleep and Charge feature, click Start -> TOSHIBA Settings -> USB Charge. Move the slider to enable or disable the Sleep and Charge function.
  • Page 99 The Sleep and Charge function might not work with certain external devices even if they are compliant with the USB specification. In those cases, turn the power of the computer ON to charge the device. When Sleep and Charge function is enabled, USB bus power (DC5V) is supplied to compatible ports even when the power of the computer is turned OFF.
  • Page 100 USB charge while the computer is powered on. When "System ON CDP Charge Mode" is enabled, your computer can supply USB bus power (DC5V, 1.5A) to the compatible ports while the computer is turned on. To set System ON CDP Charge Mode, click Start -> TOSHIBA Settings -> USB Charge. Enabled Rapid USB battery charge at maximum 1.5A...
  • Page 101 Passwords set by System Password function are different from the Windows password. User Password To set user password, click Start -> TOSHIBA Settings -> System Password. User authentication might be required to validate user rights when using System Password to delete or change passwords, and so on.
  • Page 102 If you set a Supervisor Password, some functions might be restricted when a user logs on with the User Password. To set a Supervisor Password: Click Start -> TOSHIBA Settings -> System Password. Then click the down arrow next to Advanced options to show the Supervisor Password settings.
  • Page 103 Options—Allows you to set options for sending data logs. TOSHIBA Setup Utility TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings. To enter the TOSHIBA Setup Utility, do the following: Save your work.

  • Page 104: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 105 System automatic This feature automatically shuts down the system Sleep/Hibernation into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a Mode specified time. This can be specified in the Power Options. Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer.
  • Page 106 USB Wakeup function This function restores the computer from Sleep Mode depending on the external devices connected to the USB ports. For example, if a mouse or USB keyboard is connected to a USB port, clicking the mouse button or pressing the keyboard will wakeup the computer.

  • Page 107: Troubleshooting

    In reality many problems can be solved simply, but a few might require help from TOSHIBA Support. If you find you need to consult others, be prepared to describe the problem in as much detail as possible.
  • Page 108 Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster.
  • Page 109 Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure that the device or software can be used with your computer. Use of incompatible devices might cause injury or might damage your computer.

  • Page 110: Hardware And System Checklist

    By holding down one of the following keys during startup, your computer can load the following advanced options. Advanced option TOSHIBA Setup Utility Boot Menu 0 (zero) Recovery options If your computer starts to load the Operating System instead of desired advanced options, do the following: Click Start ->...
  • Page 111 If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected, check the status of the DC IN/Battery indicator.
  • Page 112 However, if you do not believe the battery is at the end of its operating life, you should speak to TOSHIBA Support. Battery does not If you frequently recharge a partially charged...
  • Page 113 The RTC battery should be replaced only by your dealer or by a TOSHIBA servicere presentative, and then set the date/time in the TOSHIBA Setup Utility by using the following steps: Launch the TOSHIBA Setup Utility.
  • Page 114 (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact TOSHIBA Support. Internal display panel Apparent problems of the computer's display panel might be related to setup and configuration of the computer.
  • Page 115 As a last resort, you should reformat the HDD and then reload the operating system and all other files and data. If you are still unable to resolve the problem, contact TOSHIBA Support. Optical Disc Drive For further information, refer to Operating Basics.
  • Page 116 If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse.
  • Page 117 Control Panel -> Hardware and Sound -> sensitive enough. Mouse. If you are still unable to resolve the problem, contact TOSHIBA Support. USB mouse Problem Procedure Mouse pointer does In this instance, the system might be busy.Try...
  • Page 118 Restart. Hold down the F2 key and then release this key just after the computer is power on to show the TOSHIBA Setup Utility. Select Security -> BIOS Password -> Supervisor, and then register the Supervisor Password. (If the User Password has been registered, clear it first.)
  • Page 119 Sleep and Charge Enable the Sleep and Charge function under function. USB Charge within the TOSHIBA Settings. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply might be stopped for safety reasons.
  • Page 120 Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Also refer to Operating Basics, and to the documentation supplied with your monitor for further information.
  • Page 121 OFF and ON once (to disable power saving function) and then restart your computer. Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual 6-15...

  • Page 122: Toshiba Support

    If you are still unable to resolve the problem, contact TOSHIBA Support. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you might need to contact TOSHIBA for additional technical assistance. User's Manual 6-16...
  • Page 123 - they are your best resource for current information and support. TOSHIBA technical support If you are still unable to solve the problem and suspect that it is hardware- related, read the enclosed warranty booklet or visit the TOSHIBA technical support website http://pc-support.toshiba.eu User's Manual...

  • Page 124: Appendix Specifications

    Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions The following physical dimensions do not include parts that extend beyond the main body. The physical dimensions vary depending on the model you purchased. Size Approximately 379.0 (w) x 258.0 (d) x 23.35~24.05 (h) millimeters (not including parts that extend beyond the main body).

  • Page 125: Ac Power Cord And Connectors

    External RGB monitor port pin assignment Signal Name Description Red Video Signal Green Video Signal Blue Video Signal Reserved Reserved Ground Ground Ground Ground Power Supply Ground Reserved Reserved Serial Data Signal HSYNC Horizontal Sync Signal VSYNC Vertical Sync Signal Serial Clock Signal I/O (I): Input to computer I/O (O): Output from computer...
  • Page 126 Certification agencies China: U.S. and Canada: UL listed and CSA certified No. 18 AWG, Type SVT or SPT-2 Australia: Japan: DENANHO Europe: Austria: Italy: Belgium: CEBEC The Netherlands: KEMA Denmark: DEMKO Norway: NEMKO Finland: FIMKO Sweden: SEMKO France: LCIE Switzerland: Germany: United Kingdom: In Europe, two conductors power cord must be VDE type, H05VVH2-F or...

  • Page 127: Information For Wireless Devices

    Australia Europe, Africa, South Africa, Middle-East AS approved Approved by the appropriate agency Canada China CSA approved CCC approved State of Israel Africa Approved by the appropriate SII approved agency Switzerland Italy Approved by the appropriate Approved by the appropriate agency agency Information for Wireless Devices...
  • Page 128 Because wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes wireless products are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 129 If this occurs, the outsider might illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications Compatibility IEEE 802.11 Standard for Wireless LANs...
  • Page 130 Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations might impose a number of limitations to the use of wireless communication equipment.
  • Page 131 Worldwide operation ® The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band, which is license-free and compatible with radio systems in most countries in the world. Radio links You can easily establish links between two or more devices, with these links being maintained even if the devices are not within a line-of-sight of each other.
  • Page 132 Russian Limited Using SRD (Short Range Device) with Federation: implementation FHSS (Frequency-Hopping Spread Spectrum) modulation. Maximum 2.5mW (4dBm) EIRP (Equivalent Isotropically Radiated Power) is permitted to use. Maximum 100mW (20dBm) EIRP is permitted to use with the following conditions: Permitted to use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry...
  • Page 133 Using SRD with DSSS (Direct Sequence Spread Spectrum) and other than FHSS wideband modulation. Maximum EIRP density is 2mW/ MHz. Maximum100mW (20dBm) EIRP is permitted to use. Maximum EIRP density is 20mW/ MHz. Maximum 100mW (20dBm) EIRP is permitted to use with the following condition: It is permitted to use SRD for outdoor applications only for...
  • Page 134 Maximum Power Output (2400 - 2483.5 MHz) IEEE802.11 b/ Maximum 100mW (20dBm) EIRP g/n mode / Bluetooth (2400 - 2483.5 MHz) BLE Maximum 10mW (10dBm) EIRP (5150 - 5725 MHz) IEEE802.11 a/n/ Maximum 200mW (23dBm) EIRP ac mode The low band 5.15 - 5.35 GHz is for indoor use only.
  • Page 135 Band 7 2600 MHz Tx: 2,500–2,570 MHz +22 dBm ± 1 dB Rx: 2,620–2,690 MHz Band 8 900 MHz Tx: 880–915 MHz +23 dBm ± 1 dB Rx: 925–960 MHz Band 20 800 MHz Tx: 832–862 MHz +23 dBm ± 1 dB Rx: 791–821 MHz WCDMA frequency band support Band 1...
  • Page 136 priorité) pour les bandes 5.25-5.35GHz et 5.65-5.85GHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN- The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. USA-Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
  • Page 137 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.
  • Page 138 (1)(2) (3)(4) 2.4 : This equipment uses a frequency of 2.4 GHz. DS : This equipment uses DS-SS modulation. OF : This equipment uses OFDM modulation. 4 : The interference range of this equipment is less than 40 m. : This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz.

  • Page 139: Information About Intel® Amt

    ® Intel Dual Band Wireless-AC 8265 The Name of the radio equipment: 8265NGW DSP Research, Inc. Approval Number: D160055003 ® Intel Dual Band Wireless-AC 3165 The Name of the radio equipment: 3165NGW DSP Research, Inc. Approval Number: D150008003 The following restrictions apply: Do not disassemble or modify the device.
  • Page 140 Enter a new password. Password must comply with the following requirements concerning character types and length: Must be between 8 and 32 characters long. Must contain at least one number (“0”, “1-9”). Must contain a mix of lower-case (“a”, “b”, “z”, etc.) and upper-case (“A”, “B”, “Z”, etc.) letter.
  • Page 141 When using the computer with the AC adaptor connected and the AMT function set to enabled, power might still be supplied to the system memory even when the computer power is turned off, or the computer is in Sleep Mode or Hibernation Mode. When connecting the AC adaptor, the computer is powered and can be turned on.

  • Page 142: Information About Intel® Authenticate

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.
  • Page 143 Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery might not charge while computer is consuming full power.
  • Page 144 powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or pre-installed software applications, or media content.

  • Page 145: Index

    Index Touch Pad 6-10 AC adaptor additional 4-40 connecting 2-2 Equipment checklist 2-1 DC IN 19V jack 3-6 External monitor problems 6-15 Battery extending life 4-19 monitoring capacity 4-18 Hard disk drive real time clock 3-13, 4-16 automatic power off 5-8 save mode 5-9 types 4-15 Battery pack...
  • Page 146 6-5 inserting 4-32 Power 6-4 removing 4-33 Real Time Clock 6-7 Sound system 6-14 TOSHIBA support 6-16 Memory media slot 4-30 Touch Pad 6-10 USB device 6-12 Moving the computer 1-20 USB mouse 6-11 MultiMediaCard removing 4-33...
  • Page 147 USB device problems 6-12 Video mode 4-42 Web Camera 3-10 Wireless communication 7-5 User's Manual Index-3...

This manual is also suitable for:

Tecra z50-eSatellite pro r50-eSatellite pro a50-e

Table of Contents