HP Phoneline USB Network Adapter hn210p User Manual page 15

6 Select the Identification tab, and verify that your workgroup settings are
consistent with your other computers.
To locate computers on your network when the operating system is Windows
❑
2000, Me, or XP:
1 On your Windows desktop, right-click My Network Places, then select
Search for Computers.
2 In the left panel in the Computer Name box, enter the name of a missing
computer and click Search Now.
3 Verify that you are using the same protocols on the computers as follows:
From the Windows Start menu select Settings > Control Panel.
❑
Double-click the Networking & Dialup Settings icon.
❑
Double-click the Local Area Connection icon.
❑
4 Verify that you are using the same workgroup names on the computers as
follows:
On the Windows desktop, right-click My Computer and select
❑
Properties.
Click the Network ID tab. The workgroup (or domain) will be
❑
displayed.
My Network Neighborhood is empty.
Verify that your Microsoft Client is installed. See the Windows setup instructions
❑
for directions.
Verify that you have logged in correctly. Refresh the screen by pressing F5
❑
several times.
The LEDs on the adapter flash back and forth in rhythm.
The driver for the Phoneline USB Network Adapter has not been properly
❑
installed. Run the installation program again from the CD-ROM.
troubleshooting
15