Arpeggio Playback Types - Yamaha MOXF8 Reference Manual

Music production synthesizer
Hide thumbs Also See for MOXF8:
Table of Contents

Advertisement

Random SFX
Some Arpeggio types feature a Random SFX function which will trigger special sounds (such as guitar
fret noises) when the note is released. The following parameters affecting Random SFX are provided.
For turning the Random SFX on/off:
For setting the volume of the SFX sound:
For determining whether or not the volume of the SFX
sound is controlled by velocity:
NOTE
For the displays including the "RandomSFX," "SFXVelOffset," and "SFXKeyOnCtrl" parameters, see PLAY FX
display of the Arpeggio Edit for Voice mode
mode
(page
NOTE
For information on Arpeggio types that use this function, refer to the "Arpeggio Type List" in the "Data List"
PDF document.
Arpeggio setting displays
Each mode has one Arpeggio Edit display for the Arpeggio settings. If you press the ARP [EDIT] button
in any of the modes, the Arpeggio Edit display will be shown.

Arpeggio playback types

There are three main Arpeggio playback types as described below.
Arpeggios for Normal Voices
Arpeggio types (belonging to all categories except for DrPC and Cntr) created for use of Normal Voices
have the following three playback types.
Playback of played notes only
The Arpeggio is played back using only the played note(s) and octave notes.
Playback of a programmed sequence according to the played notes
These Arpeggio types have the several sequences each of which is suited for a certain chord type.
Even if you press only one note, the Arpeggio is played back using the programmed
sequence—meaning that notes other than the ones you play may be sounded. Pressing another note
triggers a transposed sequence using the pressed note as the new root note. Adding notes to those
already held changes the sequence accordingly. Arpeggios with this playback type have "_ES" at the
end of the type name.
Playback of a programmed sequence according to the played chord
These Arpeggio types created for use with Normal Voices are played back to match the chord type
determined by detecting the notes you play on the keyboard. Arpeggios with this playback type have
"_XS" at the end of the type name.
NOTE
When the "KeyMode" parameter is set to "sort" or "sortdirect," the same sequence is played back no matter
what order you play the notes. When the "KeyMode" parameter is set to "thru" or "thrudirect," a different
sequence is played back depending on the order you play the notes.
NOTE
Since these types are programmed for Normal Voices, using them with Drum Voices may not produce
musically appropriate results.
MOXF6/MOXF8 Reference Manual
(page
83).
Random SFX parameter
SFXVelOffset (Random SFX Velocity Offset) parameter
SFXKeyOnCtrl (Random SFX Key on Control) parameter
28), for Performance mode
(page
58), for Song/Pattern
Basic Structure
Functional blocks
Tone Generator block
A/D Input block
Sequencer block
Arpeggio block
Controller block
Effect block
Internal memory
Reference
Voice mode
Performance mode
Song mode
Pattern mode
Mixing mode
Master mode
Remote mode
Utility mode
Quick setup
File mode
Using iOS Applications
Appendix
MIDI
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Moxf6

Table of Contents