Yamaha MOXF8 Reference Manual page 61

VOICE PERF
[F3] MEQ (Master EQ)
From this display you can apply five-band equalization (LOW, LOW MID, MID, HIGH MID, HIGH) to all Parts of the
selected Performance, or to all Voices.
Gain
SHAPE
Determines whether the equalizer type used is Shelving or Peaking. The Peaking type attenuates/boosts the signal at
the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at frequencies above or below
the specified Frequency setting. This parameter is available only for the LOW and HIGH frequency bands.
Settings:
shelv (Shelving type), peak (Peaking type)
shelv EQ LOW
+
0
–
peak
FREQ (Frequency)
Determines the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting.
Settings:
LOW: Shelving 32Hz – 2.0kHz, Peaking 63Hz – 2.0kHz
LOW MID, MID, HIGH MID: 100Hz – 10.0kHz
HIGH: 500Hz – 16.0kHz
GAIN
Determines the level gain for the Frequency (above), or the amount the selected frequency band is attenuated or
boosted.
Settings:
-12dB – +0dB – +12dB
Q (Frequency Characteristic)
This varies the signal level at the Frequency setting to create various frequency curve characteristics.
Settings:
0.1 – 12.0
NOTE
For details on EQ structure, see the "Synthesizer Parameter Manual" PDF document.
[F4] USB I/O
USB OUTPUT SELECT
Determines whether the audio signal for each Part is output to USB 1/2 or USB 3/4. This parameter is available only
when "Mode" is set to "2StereoRec" in the USB I/O display of the Utility mode.
Settings:
1&2, 3&4
MOXF6/MOXF8 Reference Manual
SONG PATTERN MIX
Q (frequency bandwidth)
+
0
–
5 bands  LOW LOW MID MID HIGH MID HIGH
EQ HIGH
Gain
+
Frequency
0
–
Frequency
+
0
–
MASTER REMOTE
Frequency
Gain
Frequency
Frequency
Gain
Frequency
Frequency
UTILITY QUICK SET FILE
Performance Mode
Performance Play
[F1] PLAY
[F2] VOICE
[F3] PORTA
[F4] EG
[F5] ARP ED
[F6] EFFECT
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Performance Edit
Common Edit
[F1] GENERAL
[F2] OUT/MFX
[F3] MEQ
[F4] USB I/O
[F5] A/D IN
[F6] EFFECT
Part Edit
[F1] VOICE
[F2] OUTPUT
[F3] EQ
[F4] TONE
[F5] RCV SW
Performance Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Performance Record
[F1] SETUP
[F2] REC TR
[F3] OTHER
[F5] CLICK
[F6] INFO
Supplementary Information
61