Yamaha MOXF8 Reference Manual page 71

VOICE PERF
[SF2] VOICE
This convenient operation lets you copy Effect and Master
EQ settings of a certain Voice assigned to a certain
Performance to the Common parameters of the currently
edited Performance. This would come in handy when a
certain Performance has settings that you want to use in your
Performance program.
NOTE
When this display is shown, you can hear the original sound
at the copy source by pressing the [EDIT] to call up the
Compare mode. Pressing the [EDIT] button again will exit
from the Compare mode.
Source Voice
Determines the Bank and the Voice number to be copied.
Settings:
Bank: PRE1 – 9, USR1 – 3, PDR, UDR, GM, GMDR
Voice Number: 001(A01) – 128 (H16)
Determines which Effect units are copied
This convenient operation lets you copy Effect and Master EQ settings of a certain Voice assigned to a certain
Performance to the currently edited Performance. You can select Effect units to be copied from "Rev," "Cho," "MEQ,"
and "MFX."
NOTE
Even when each of the Reverb and Chorus is set to "on," executing the Job does not copy the Send Level from the Voice to the
Performance. If you want to apply the same depth of the Reverb and Chorus as in the Voice mode to the copied Voice, manually
set the Reverb Send and Chorus Send in the OUTPUT display
Voice Edit.
[F4] BULK (Bulk Dump)
This function lets you send all your edited parameter settings for the currently selected performance to a computer or
another MIDI device for data archiving. Press the [ENTER] button to execute Bulk Dump.
In order to execute Bulk Dump, you will need to set the correct MIDI Device Number, with the following operation: [UTILITY] 
NOTE
[F6] MIDI  [SF1] CH  "DeviceNo."
MOXF6/MOXF8 Reference Manual
SONG PATTERN MIX
(page
MASTER REMOTE
66) of the Performance Part Edit to the same value as in
UTILITY QUICK SET FILE
Performance Mode
Performance Play
[F1] PLAY
[F2] VOICE
[F3] PORTA
[F4] EG
[F5] ARP ED
[F6] EFFECT
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Performance Edit
Common Edit
[F1] GENERAL
[F2] OUT/MFX
[F3] MEQ
[F4] USB I/O
[F5] A/D IN
[F6] EFFECT
Part Edit
[F1] VOICE
[F2] OUTPUT
[F3] EQ
[F4] TONE
[F5] RCV SW
Performance Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Performance Record
[F1] SETUP
[F2] REC TR
[F3] OTHER
[F5] CLICK
[F6] INFO
Supplementary Information
71