Table of Contents
Advertisement
Display
Call for Service
XXX
Install Tray XXX
MPT/ENV
not installed
Warning Messages
Display
Paper out tray #
XXX
Face Down Tray paper full Remove paper from the Face-down tray.
Finisher all bins full
Finisher bin # full
Tray # open
Staple Cartridge
not installed
Finisher out of staples
Toner low replace EP Cart. Prepare a new EP Cartridge.
Call Operator. Tray #
fail.
Quick Reference Guide
A problem has been detected that requires service. Call for service.
Install specified tray. (Install XXX = Media type.)
If both the MPT and ENV are not installed, the printer stays in error
state and does not function. The MPT or ENV must be reinstalled
before the error can be cleared.
Load specified media Into specified tray. # = tray number 1 through 5.
XXX = Media type (The following abbreviations are used, transpar.,
trans.-pp, preprint, letterhead).
Remove paper from all the Finisher bins.
Remove paper from specified bin. (# = bin number 1 through 3.)
Check for and close specified tray. (# = tray number 1 through 5.)
Install staple cartridge.
Replace staple cartridge.
Power printer off then on. If not cleared, call your service representative.
(# = tray number 1 through 5.)
Description/Action
Description/Action
21
Advertisement
Table of Contents
