Adding Paper To Tray 4 Or 5; Adding Paper To The Multi-Purpose Tray (Mpt) - Hitachi DDS 32 Quick Reference Manual

Adding Paper to Tray 4 or 5

1. Open the tray.
2. Insert paper into the compartment and adjust the guide to the correct paper length.
Note:
The paper stack should not exceed the limit mark.
3. Push the tray in until it latches.

Adding Paper to the Multi-Purpose Tray (MPT)

1
1. Pull out the extension tray to the desired length.
2. Place paper along the right side of the feeder.
3. Adjust the paper guide to slightly touch the paper stack.
4. Insert the paper stack as far into the printer as it can go.
6
1
2
4
2
3
Quick Reference Guide
3