Warning Messages - Hitachi UX Twin-Nozzle Technical Manual

5.7 Warning Messages

● If any communication is in error, the associated warning message appears below the status display area.
● Note the message to confirm the error and then take remedial action as appropriate for the indicated error
code.
Print description
Message name[ ]
−
Ink operating time １００(hours)
Cumulative op. time １００(hours)
Print count １０００(prints)
Ink pressure 2 ０．２５０
Ink pressure 1 ０．２５０(MPa；standard value:０．２５５)
Maintenance
Error
Name
code
Transmissioncode
001
error
Print specifications
002
code error
Print character code
003
error
004 Item number error
005 Header error
Ready-for-
006
reception error
Print specifications
008
code error
009 ETX code error
010 DLE code error
011 STX code error
012 ENQ code error
ESC code error
013
(ESC, ESC2)
5-62 ●Warning Messages
[Ready ]
Makeup
Auxiliary Environment Select
function setup menu login user
Description
● The transmitted code was not defined
for communication use.
● The transmitted message had an illegal
structure.
The print specifications data value was
illegal.
The maximum value was exceeded by
the number of characters for printings
that could be received as one item.
The item number code value was illegal. Check the printings communication text.
The header value was illegal.
● An attempt was made to establish
communication while the "not ready
for reception" state prevailed.
● "Apply" key and message window
were both displayed.
● "Off-line fixed" has been set in
Communication environment.
● Communication monitor screen was
displayed.
● Communication was conducted during
the stop or shutdown process.
The maximum value was exceeded by
the print specifications data.
The ETX code position was illegal.
The DLE code position was illegal.
The STX code position was illegal.
The ENQ code position was illegal.
The ESC code position was illegal.
Warning
2018.07.07 12:45
Com=1
Current user ID : user2
＋
Twin
1 2
Ink
Print count
reset
Create/Edit
Menu
message
Error code table
Warning
Check
Check the baud rate and transmission
code.
Check the print specifications
communication text.
Check the printings communication text.
Check the header.
Check the transmission timing.
Check the print specifications
communication text.
Check the transmission procedure and
ETX code.
Check the transmission procedure and
DLE code.
Check the transmission procedure and
STX code.
Check the transmission procedure and
ENQ code.
Check the transmission procedure and
ESC code.