Adjusting Salt Consumption - Haier DW12-PFE8 series Operation Manual

Adjusting salt consumption

The dishwasher is designed to allow for adjusting the amount of salt consumed
based on the hardness of the water used. This is intended to optimize and customize
the level of salt consumption so that it remains at a minimum.
To adjust salt consumption, proceed as follows:
Unscrew the cap from the salt container;
There is a ring on the container with an arrow on
it (see figure to the side).
If necessary, rotate the ring in an anticlockwise
direction from the "-" setting towards the "+"
sign, based on the hardness of the water being
used.
It is recommended that adjustments be made in accordance with the following
table:
The default setting of the water softening system is -.
- If using multi-functional tablets fill the salt dispenser and set the adjuster to -; if
the hardness of the water is greater than 60ºfH, set it to +.
Hardness of the water
ºdH ºfH mmol/l
0-17 0-1,7
0 -10
1,8-4,4
10-25 18-44
25-50 45-89 4,5-8,9
>89 >8,9
>50
Selector
Salt
knob
consumption
position (grams/cycle)
/ 0
- 20
MED
40
+ 60
Autonomy
(cycles/2 kg)
/
60
40
25
EN
14