Installation - Haier DW12-PFE8 series Operation Manual

Installation

Positioning the appliance
Positioning the appliance in the desired location. The back of the appliance should
rest against the wall, and the sides, along the adjacent cabinets or wall. The
dishwasher is equipped with water supply and drain hoses that can be positioned
to the right or the left to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust
the dishwasher, making it level. The appliance should not be inclined more than
2˚. If the appliance is level, it will help ensure proper performance.
Cold water connection
Connect the water supply hose to a
threaded 3/4 (gas) connector, making sure
that it is fastened tightly in place (see fig.A).
If the water pipes are new or have not
been used for an extended period of time,
let the water run to make sure that the
water is clear and free of impurities. If this
precaution is not taken, there is a risk that
the water inlet can get blocked and damage
the appliance.
Warning:
The appliance is to be connected to the water mains
using new hose-sets and that old hose-sets should not
be reused.
EN
fig.A
6