Troubleshooting; Link Status Leds - Agilent Technologies G1369C User Manual

3 Getting Help

Troubleshooting

Troubleshooting
If the LAN Interface Card does not successfully connect to the network,
there are several ways to get status information from the card.

Link Status LEDs

On the card, near the RJ- 45 connector, two status LEDs are mounted. See
Figure
Figure 44
The LED named "Speed" shows the actual link speed.
Table 9
LED off
LED on
The LED named "Activity" shows whether the physical link is established
or not. In addition, it shows whether the card is transferring data or not.
Table 10
LED off
LED on
LED blinking
54
44.
Status LEDs
LED "Speed"
LED "Activity"
link speed 10 Mbps
link speed 100 Mbps
no physical link established
physical link established
transferring data
G1369C LAN Interface User Manual