Storing The Settings Permanently With Bootp Program - Agilent Technologies G1369C User Manual

2 Getting Started
Automatic Configuration with Bootp
When using this Bootp mode, the parameters are not written into the non-volatile memory
N O T E
of the card. If you delete this Bootp Configuration, the LAN Interface will show up as shown
in
If you want to store your parameters permanently on the card (for use without the CAG
Bootp server), refer to
36
Figure 20 on page 33 (Bootp mode).

"Storing the Settings Permanently with Bootp Program"

G1369C LAN Interface User Manual
on page 37.