LAN Control Configurations
The basic LAN configurations are shown below.
Local Configuration Using Cross-over Cable
The simplest way is a configuration with a single system.
Figure 2
LAN Using a HUB and Twisted Pair Cables
More complicated setup than direct cross- over connection.
Patch-cable
7 m (5023-0202) for all cables
Figure 3
G1369C LAN Interface User Manual
Patch-cable Cross-over
Shielded 3 m (5023-0203)
Local configuration using cross-over cable
Shielded
Twisted pair
LAN configuration using a HUB and twisted pair cables
Introduction - Around your LAN Interface Card
Introduction to the LAN Interface Card
1
11