Rack; Warming Drawer; Stainless Steel; Care And Cleaning - GE Monogram ZKD910 Owner's Manual

Warming
drawer

Rack

Stainless
steel
Control
knob
Be sure the controls are in the OFF position and all surfaces are cool before cleaning any part of the

warming drawer.

Use soap and warm water to thoroughly clean.
Clean the rack with detergent and water. After
cleaning, rinse the rack with clean water and
dry with a clean cloth.
Do not use a steel wool pad; it will scratch the
surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the
grain. Follow cleaner instructions for cleaning
the stainless steel surface.
The control knob may be removed for easier
cleaning.
Before removing the knob for cleaning, please
note that it is in the PROOF position.
Wash the knob in soap and water or a vinegar
and hot water solution but do not soak.
Dry and replace the knob.

Care and Cleaning

Electric Warming Drawer
To inquire about purchasing stainless steel
appliances cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
National Parts Center
ge.com (U.S.)
www.GEAppliances.ca (Canada)
800.626.2002 (U.S.)
888.880.3030 (Canada)
11