Brother P-touch PT-9400 User Manual page 75

ERROR MESSAGE
LIMIT EXCEEDED
SET BETWEEN
4.0-30.0 cm
LIMIT EXCEEDED
SET BETWEEN
1.6-11.8 inch
LINE LIMIT
MAX 5 BARCODES
MAX 5 BLOCKS
MAX 10 LINES
MAX 30 CHRS
MAX 50 CHRS
CAUSE
This message appears if the set label
length (LENGTH function on the
FORMAT menu) is not within the
range 4.0 to 30.0 cm.
This message appears if the set label
length (LENGTH function on the
FORMAT menu) is not within the
range 1.6 to 11.8 inches.
This message appears if you press
Back Space
to delete text or press
Clear
to add a new line, causing
New Block
the number of lines in a block to
exceed the maximum possible for
the installed tape.
This message appears if you try to
recall a file or print text which con-
tains more lines than the maximum
possible for the installed tape.
This message appears if five bar-
codes already exist when you press
Barcode
.
This message appears if five blocks
already exist when you hold down
Code
and press
New Block
This message appears if ten lines
have already been entered in a
block of text when you press
.
New Block
This message appears if you press
Back Space
to delete text, causing the
Clear
number of lines in a block to
exceed the ten-line limit.
This message appears if more than
30 characters are selected when
Copy
you press .
&Paste
This message appears if you try to
add more than 50 underlines,
frames and shadings.
Type in a label length that
is within the specified
range.
Type in a label length that
is within the specified
range.
Adjust the number of lines
so that the block will not
have more than the maxi-
mum possible.
Reduce the number of
lines or install a wider
tape.
Limit the number of bar-
codes in the text to five.
Limit the number of
blocks in the text to five.
.
Limit the number of lines
in the text block to ten or
hold down
New Block
block.
Adjust the number of lines
so that the block will not
have more than ten lines.
Limit the number of char-
acters that will be copied
and pasted to 30.
Limit the number of
underlines, frames and
shadings in the text to 50.
ERROR MESSAGE LIST ERROR MESSAGE LIST
ERROR MESSAGE LIST ERROR MESSAGE LIST
SOLUTION
Code
and press
to create a new
91